Lynx Technik yellobrik ORR-1802

Dual 3Gbit Fiber Optic to SDI Receiver

The ORR 1802 is a compact dual channel fiber optical to SDI receiver designed to combat the restrictions involved with the distribution of uncompressed broadcast quality video signals over long distances. 

Part No:
ORR-1802
Usually Ships in 1-2 Days
£569.00 £474.17
Did you find this item priced lower than £474.17 somewhere else? Yes

The ORR 1802 is a compact dual channel fiber optical to SDI receiver designed to combat the restrictions involved with the distribution of uncompressed broadcast quality video signals over long distances. 

When paired with a SDI optical transmitter (e.g. yellobrik OTT 1812, OTX 1812, OTX 1842 etc) you have a very cost effective optical transmission / receiver system for signals up to 1080p60 (3Gbit/s), while preserving full uncompressed quality. 

The ORR1802 has two completely independent channels and each will auto-detect and re-clock any 270Mbit / 1.48Gbit and 2.97Gbit SDI fiber source prior to electrical conversion. The module is fully compatible with 3Gbit Level A and Level B formats.

  • Dual channel
  • Supports SDI video inputs up to 3Gbit/s (1080p60)
  • 3Gbit Level A and Level B support (all formats)
  • Auto reclocking 270Mbit / 1.48Gbit / 2.97Gbit
  • Error free optical reception
  • 1260nm to 1620nm wavelength input range
  • Duplex LC/PC singlemode optical connection
  • Supports hot swapping and hot plugging
More Information
Specification

Fiber Inputs

  • 2 x fiber optic Inputs (one for each channel) Duplex (single mode) using LC/PC Connections
  • SMPTE 297M - 2006
  • Hot pluggable
  • Input range (wavelength) 1260nm to 1620nm
  • RX sensitivity -3dBm to -16dBm
  • RX active LED on side of module
  • (SMF) Singlemode fiber


SDI Outputs

  • 2 x SDI video on 75 Ohm BNC connector (two independent channels)
  • SMPTE 424M, SMPTE 292M, SMPTE 259M, DVB-ASI 
  • Multi-standard operation from 270Mbit/s to 3Gbit/s
  • Electrical Return Loss: >15dB from 5MHz to 1.5GHz, >10dB from 1.5GHz to 3GHz


Power

  • +12VDC @ 2.2W nominal - ( supports 7 - 16VDC input range )


Physical

  • Size: 140mm x 42mm x 22mm (5.51” x 1.65” x 0.86”) including connectors
  • Weight: 125g (4.4oz)

 

Ambient 

  • 5 - 40oC (41 - 104oF) 90% Humidity (non condensing)
  • Module
  • AC power supply