KRK Rokit RP5 G3 Active Studio Monitor (Single)

Rokit Powered RP5 G3 Bi-Amped Studio Monitor

The KRK Rokit RP5 G3 is a professional high end two-way studio monitor with a 1" tweeter and 5" woofer.  Featuring a  45Hz-35kHz frequency response and a 106dB max SPL, the Rokit RP5 is capable of packing quite a punch, and a detailed one at that! 

In stock
Part No:
£129.00 £107.50
Did you find this item priced lower than £129.00 somewhere else? Yes

The KRK Rokit RP5 G3 is an expert two-way nearfield active studio monitor utilising a 6” Aramid glass composite woofer and a 1” soft dome tweeter.  This third-generation model is perfect for audio recording, mixing and mastering. The 1” tweeter and 6” woofer are autonomously powered by Class A-B 20 watts and 30 watts amplifiers respectively, thanks to the RP5 G3’s bi-amped system, offering a total system power of 50 watts. The drivers are guaranteed to retain power and clarity if the source material becomes weightier at one end of the frequency spectrum because of the RP5 G3’s dual amplifier setup - you can record and mix with confidence.

The Rokit RP5 G3 shoves the natural high end roll off you would typically find in active monitors well beyond human hearing’s range, with a frequency response of 38Hz – 35kHz, giving a far superior level of accuracy and clarity to the reproduction of high frequencies.  The monitor can also throw a serious punch with its imposing low-end extension, especially for a speaker with such a small footprint.  This extension is fortified by the addition of a front-firing bass port.

Housed in an MDF enclosure with a sleek black vinyl finish, the KRK Rokit RP5 controls sit to its rear. Unbalanced RCA, balanced ¼” TRS jack and balanced XLR connections for signal input are all located there, as well as high and low frequency controls for room acoustics compensation and a master level control.

The KRK Rokit RP5 G3 can supply an imposingly high level for its size, with a max SPL of 107dB, making it well suited to playback as well as production. If you’re in need of the precision of larger professional monitors, but with a compact design and affordable pricing, the KRK Rokit RP5 G3 is the perfect active monitor.


"Bottom line, I feel I could trust these to work on, and everything I have done with them so far has translated very well, be it in my car, on computer speakers, earbuds or television speakers."- Recording Mag

"The improved clarity in the high end, the better seperation between the middle and low end, and the extra setting options for the high and low end, give this speaker just that what we missed with the GEN2 speakers."- Gearjunkies

"The Rokits are accurate enough to get a good idea what’s going on in your mix, but at the same time their impressive bass extension and slightly hyped sound makes them very enjoyable to use."- Attack Magazine

  • Brand new Bi-amped, class A/B amplifier offering large headroom and low distortion
  • New Proprietary waveguide optimised for superior imaging
  • New 1” Soft-Dome tweeter provides pristine clarity and extended response up to 35kHz
  • New High-frequency adjustment tailors the system to personal taste
  • Lightweight, glass-Aramid composite woofer delivers clear midrange and tight bass
  • New Low-frequency adjustment tailors the monitors to taste and adjusts for room acoustics
  • New Front Firing Port — Low-frequency extension while reducing boundary coupling
  • New Radiused edges reduce distortion from diffraction
  • New Low-resonance enclosure for minimised distortion and colourisation
  • New Multiple audio input connectors (Balanced XLR, Balanced 1/4" TRS, Unbalanced RCA) for universal connectivity in any studio environment
  • Factory installed foam pad provides isolation between the speaker and surface
  • Peak SPL : 106dB
  • Frequency Response 45Hz - 35kHz (+/- 2 dB)
More Information

Configuration: 2-Way

System type: Active Studio Monitor

Low-Frequency: 5" Aramid Glass Composite woofer

Mid-Frequency: N/A

High-Frequency: 1" soft dome tweeter

Frequency Response: 45Hz - 35kHz

Max Peak SPL: 106 dB

Amplifier Class: Class A-B

Power Output: 50W

High Frequency: 20W

Mid-Frequency: N/A

Low Frequency: 30W

Input Impedance (Ohms): 10 K Ohm balanced

HF Level Adjust: -2dB, -1dB, 0, +1dB

System Volume: (-30dB - +6dB)

Indicators: Power

Input Connectors: Unbalanced RCA, Balanced 1/4" TRS, Balanced XLR

AC Power Input: Selectable 110V-120V / 220V-240V (50Hz - 60Hz) or 100V (50Hz - 60 Hz)

Enclosure Construction: MDF

Finish: Black vinyl wrap

Port Configuration: Front firing slot port

Dimension and Weight

9.7" (246mm) x 7.4" (188mm) x 11.2" (284mm) (D x W x H)
Weight: 13 Lbs. (5.9 Kg.)

We found other products you might like!