Skip to the beginning of the images gallery

PMC PMC 8-2 SUB-R Active Subwoofer

Active sub with 2 x 8 inch bass units for use as dedicated sub or to complete the Right channel of a 6-2 or 8-2 XBD system.

The PMC8-2 SUB is a larger subwoofer for full-bandwidth, high-resolution reference monitoring in the most demanding professional environments.

Part No:

PMC8-2SUB-R

Call for Lead Time

£5,335.00 £4,445.83

Did you find this item priced lower than £4,445.83 somewhere else? Yes

Description

The PMC 8-2 SUB is a true low-frequency monitor like the PMC8 SUB and offering the same DSP engine and seamless integration with surround and immersive systems, the PMC8-2 SUB betters the spec of its smaller sibling, offering higher maximum SPL output down to 25Hz.

With the same dimensions as the PMC8-2 midfield monitor, the PMC8-2 SUB’s twin eight-inch bass drivers are powered by independent 400W Class-D amplifiers. The same configuration options are available as on the PMC8 SUB, likewise accessible on the speaker’s rear panel or by using the browser-based SoundAlign™ software via a LAN-connected tablet, smartphone or computer.

The PMC8-2 SUB can be used as a standalone subwoofer for multichannel and immersive sound systems, or as an XBD cabinet with either PMC6-2 or PMC8-2 s, creating a system of awesome power and dynamic range. The sub is available in either left- or right-handed cabinet versions (PMC8-2 SUB-L or PMC8-2 SUB-R), to allow placement of the bass drivers on the outside edges of a stereo array, matching the arrangement of the main monitors.

Features

Active subwoofer with twin 8-inch bass drivers and ATL™ bass loading
Frequency response: 25Hz - 500Hz (- 3dB) (@1m full space, on-axis)
Max. cont. SPL: 115dB @1m (quarter space value calculated as +3dB from half space measurement.
Unweighted input,20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)
State-of-the-art Class-D amplifier: 2 x 400W
Analogue/AES3 digital input (16/24-bit, 18 -192kHz sample rate)
Digital ‘through’ output (AES3 24-bit, 96kHz)
SoundAlign™ network control interface for single or group EQ & settings
Sophisticated DSP driver protection, EQ, and delay/phase options
Dedicated XBD configuration mode

Specification

More Information
Specification	Type: Active subwoofer with twin 8-inch bass drivers and ATL™ bass loading Drive Unit Complement: LF PMC 200mm (8”) studio 8 driver Effective ATL™ Length: 3m (9.8ft) Frequency Response: 25Hz - 500Hz (- 3dB) (@1m full space, on-axis) Sensitivity: +4dBu input signal = 98dB SPL @ 1m Max continuous SPL: 115dB @1m, (Quarter space value calculated as +3dB from half space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration) Max Peak SPL: 121dB @1m, (Quarter space value calculated as +3dB from half space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration) Input: XLR switchable between analogue & digital AES3 Analogue input - +20/+24dBu max. input level (selectable) - 22K ohm input impedance Digital input - 16/24-bit AES3 signal, left, right or left + right - 18 - 192kHz Sample Rate- 110 ohm input impedance Expansion card slot - For future connectivity upgrades Output: XLR digital AES3 (fixed 24-bit @ 96kHz) Network: RJ45 for use with PMC SoundAlign web interface Features: Level Trim: (+/-10dB) High-pass/Low-pass filter: (20 - 200Hz, 12dB/Oct) Delay: (0 - 30mS) Phase: (normal or inverted) LF & HF shelving filters: (20Hz - 20kHz, +/- 10dB, Q 0.707) Parametric EQ: (5 bands, 20Hz - 20kHz, +/- 10dB) User presets: (3 + factory defaults) Latency: 2.4mS Amplifier power per channel: 300Wrms Mains: 100 - 240VAC auto-switching, 50-60Hz (IEC C14) Power consumption (idle): 25W Power consumption (max): 300W Cabinet dimensions: H 266mm (10.5”) W 551mm (21.7”) D 440mm (17.3”) Weight: 18.5kg (40.8lbs) each