Teradek Bolt Pro 500 Wireless 3G-SDI/HDMI Video Receiver (BOLT-937)

Dual Format SDI/HDMI Wireless Video Receiver - 500ft

The redesigned Bolt Pro 500 boasts a 20% smaller & lighter chassis, longer range upto 500ft without delay, individual identity plus much more.  This Bolt Pro 500 3G-SDI/HDMI receiver is a premium wireless video solution for cinematographers, broadcasters and independant content creators.

In stock
Part No:
TER-BOLT-937
£1,278.00 £1,065.00
Did you find this item priced lower than £1,278.00 somewhere else? Yes

Bolt 500, with highly refined software, new wireless radios and a redesigned chassis, these new models are the most reliable and capable monitoring solutions Teradek have ever built. Metadata and timecode support, 3D LUTs, dual inputs/outputs, multicast capable, manual frequency selection and USB 3.0 GRAB Engine are all included on these new models.

  • Longer Range

Transmit visually lossless video up to 500ft with no delay.

  • 2 New DFS Channels

Operate interference-free more often in the USA and Europe by making use of two newly introduced DFS channels.

  • Individual Identity

Easily identify which Bolt TX and RX work together with removable colored top plates.

  • Built-In HDMI to SDI Converter

Perfect for use with MoVI and other gimbals, Bolt’s TX has a built-in HDMI to SDI converter, allowing you to connect both your on-camera monitor and video source via the same device.

  • 20MHz Channels

Use more than twice as many Bolts in one location or avoid interference like never before.

  • 20% Smaller Chassis

Not just smaller, but lighter too, allowing these models to integrate into any rig unnoticed.

  • Rapid Reconnection

Reconnect times during a dropped link are now instantaneous once you move back into range.

  • More Robust Than Ever Before

Reach your Bolt’s full range and potential right out of the box with new software that provides the most robust wireless link we’ve ever created.

  • 1 x Bolt 500 (937) Receiver
  • 1 x Thumb Screw 1.25 inch length (1/4"-20 inch)
  • 1 x Lightstand Adapter (1/4"-20 inch)
  • 1 x HDMI 18in Cable (Type A to Type A)
  • 1 x USB 3.0 Cable A to Micro B (3ft Length)
  • 1 x PSU 2-Pin Lemo to 18W AC Adapter 6ft cable