Skip to the beginning of the images gallery

Magewell Pro Convert 12G SDI 4K Plus

Standalone 4K/60 SDI to NDI Encoder

Magewell Pro Convert 12G SDI Plus encoder is plug-and-play, converts 4K/60fps, 12G-SDI input signals into full-bandwidth NDI streams with low latency.

Part No:

64090

Usually Ships in 1-2 Days

£1,038.00 £865.00

Did you find this item priced lower than £865.00 somewhere else? Yes

Description

Pro Convert 12G SDI Plus encodes full NDI® streams from single-link, 12G-SDI input, while new decoders convert NDI or streaming inputs for 1080p SDI output. The plug-and-play Magewell Pro Convert 12G SDI Plus encoder ingests video up to 4K at 60 frames per second over a single-link, 12Gbps SDI interface and converts it to full NDI streams with extremely low latency. The encoder supports up to 16 channels of embedded audio, while automatic input format detection and DHCP-based network configuration eliminate the need for manual setup. An SDI loop-through connection allows the input signal to be sent simultaneously to additional displays or equipment without external splitters or routers, enabling sources to be easily used in new IP workflows without disrupting existing traditional video infrastructure.

Pro Convert 12G SDI Plus features for live production applications include program and preview tally lights; protocol conversion for NDI control of non-NDI PTZ cameras; and a standard 1/4″-20 thread for camera mounting. The new model is the seventh Pro Convert NDI encoder, joining earlier HD and 4K models with HDMI, 6G-SDI or 3G-SDI interfaces.

Features

Connects existing source equipment into NDI-enabled, IP-based media networks
Supports inputs up to 4K at 60fps with 16 channels of embedded audio
Plug-and-play ease of use with automatic input format detection and DHCP network configuration
SDI loop-through connection

Specification

More Information
Specification	Input & Loop through Features Max video input & loop through: 4096x2160 60fps. Supported resolutions include: 4096x2160p/3840x2160p/2048x1080p/1920x1080p 23.98/24/25/29.97/30/47.95/48/50/59.94/60 2048x1080i/1920x1080i 25/29.97/30/47.95/48/50/59.94/60 1280x720p 50/59.94/60 720x576 25p/50i (PAL SD) 720x480 29.97p/59.94i (NTSC SD) Support RGB/RGBA/YUV/YUVA signals with 10/12-bit color depth Support RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2 color sampling Support RGB, YUV BT.601/709/2020 video input 16-channel SDI embedded audio inputs SD/HD/3G/6G/12G-SDI BNC input & loop through Support SD (ST 259)/HD (ST 292)/3Ga (ST 425)/3Gb (ST 425)/3Gb-DL (ST 425)/3Gb-DS (ST 425)/6G (ST 2081)/12G (ST 2082) SDI standards Receive 12G-SDI transmitted up to 30m (98ft), 6G-SDI 80m (262ft) NDI Encoding Features Encoding Full NDI real-time stream at up to 4096x2160 60fps 4:2:2 8-bit Output the same resolution as input or any custom resolution. Typical outputs include: 4096x2160p/3840x2160p/2048x1080p/1920x1080p 23.98/24/25/29.97/30/47.95/48/50/59.94/60 2048x1080i/1920x1080i 25/29.97/30/47.95/48/50/59.94/60 1280x720p 50/59.94/60 Output frame rate same as the original, 1/2, 1/3 or 1/4 of input frame rate Encoding 16-channel NDI-embedded audio Support NDI 4.x Web UI Management Provide comprehensive information regarding the device and signals in real-time Allow to configure how an input is processed and encoded, including deinterlacing, up/down scaling, frame rate, aspect ratio, as well as the network connection Update firmware Support USB RNDIS/ECM Support IE/Edge/Firefox/Chrome/Safari/Opera web browsers Provide HTTP APIs On-board Control Buttons 16 Position Rotary DIP Switch: set board-index from 0 to F PTZ Control Control PTZ cameras using protocols of VISCA, Visca UDP, Visca UDP2rs232, PELCO-P and PELCO-D via NDI Mini-DIN–8 jack (shared with Tally light) Network Interfaces 10/100/1000Mbps Ethernet IEEE 802.3af PoE USB Interface USB2.0 Type B 5V/2.1A power supply USB RNDIS/ECM Supported Products NDI Studio Monitor OBS vMix Any other NDI-enabled product LED Indicators Status LEDs indicate: Power supply: on/off Tally: preview/program Input signal: locked/unlocked Loop through signal: on/off Form Factor 117.5mm (L) x 66.7mm (W) x 23.4mm (H) Screw Mounting Hole ¼–20 threaded hole Power Consumption 5V max current: ~1.65A Max power consumption: ~8.5W Working Environment Operating temperature: 0 to 45 deg C Storage temperature: –20 to 70 deg C Relative humidity: 5% to 90% non-condensing