Genelec 9401A System Management Device

System Management Device for AoIP Networking

Genelec has further expanded its UNIO Audio Monitoring Service Platform with the introduction of the 9401A System Management Device for Audio-over-IP Networking. The 9401A adds powerful AoIP connectivity to Genelec’s range of Smart Active Monitors and Subwoofers in ST2110, AES67 and Ravenna formats. With its 16 monitor outputs, the 9401A supports all formats from stereo to 9.1.6, and brings all the convenience and flexibility of multi-channel networked audio to the UNIO platform.

Part No:
9401A
Coming January 2024!
£2,600.00 £2,166.67
Did you find this item priced lower than £2,166.67 somewhere else? Yes

Genelec has further expanded its UNIO Audio Monitoring Service Platform with the introduction of the 9401A System Management Device for Audio-over-IP Networking. The 9401A adds powerful AoIP connectivity to Genelec’s range of Smart Active Monitors and Subwoofers in ST2110, AES67 and Ravenna formats. With its 16 monitor outputs, the 9401A supports all formats from stereo to 9.1.6, and brings all the convenience and flexibility of multi-channel networked audio to the UNIO platform.

As a partner to Genelec’s Smart Active Monitors and Subwoofers, the 9401A provides 16 channels of digital connectivity, plus dedicated subwoofer and auxiliary stereo outputs, all via AES/EBU. The auxiliary output serves as an ideal feed for headphones, enabling binaural and secondary stereo loudspeaker monitoring, while the 9401A’s tight integration with Genelec Loudspeaker Manager (GLM) software allows entire system calibration, including subwoofer alignment and support for bass management. The 9401A’s separate subwoofer output enables Smart Active Subwoofers to be easily chained to increase the low frequency SPL output, and channel capacity can be quickly expanded with more 9401A devices, to provide compatibility with 22.2 and other high channel count immersive formats.

In addition to its AoIP networking capabilities, loudspeaker management and calibration is achieved via the proprietary GLM network connectivity of the 9401A. Tactile control of the entire monitoring system can then be achieved via the new 9320A Reference Controller, which acts as a bridge to the UNIO platform and provides instant one-click access to a vast number of monitor features built into the Smart Active Monitoring family.

Performance wise, the 1U rack-mounting 9401A is compatible with sample rates from 44.1 kHz to 192 kHz, using 16, 24 and 32 bit resolution per sample. Employing Gigabit Ethernet for low latency, the 9401A supports the ST2110 broadcast suite with ST2022-7 redundant network connectivity and NMOS integration to enterprise management and automation systems. Designed for decades of reliable service and built to the highest environmental standards at Genelec’s factory in Iisalmi, Finland, the 9401A also supports proprietary Intelligent Signal Sensing (ISS) technology, for lower power consumption.

  • Enables the complete product range of SAM Monitors and SAM Subwoofers to be used in AoIP environments using ST2110, AES67 and Ravenna AoIP technologies. (Except 8320A due to no AES connectivity)
  • Enables digital-in/digital-out audio connectivity without quality compromise.
  • Converts AoIP to eight AES/EBU digital audio outputs (16 channels of audio) on a DB25 connector.
  • Offers direct digital audio connectivity for 73xx series SAM Subwoofers over AES/EBU on XLR.
  • Supports subwoofer-enhanced systems up to 9.1.6 (16 channels).
  • Offers an auxiliary general purpose stereo output (AES/EBU on XLR) for other applications including continuity monitoring and binaural feed for headphones.
  • Using several 9401A units extends the channel count.
  • Works seamlessly with GLM version 5 and up (GLM 5 launches Jan 2024).

OTHER FEATURES

  • Use several 9401A units to extend the channel count.
  • Genelec Loudspeaker Manager (GLM) network.
  • Intelligent Signal Sensing (ISS) power save mode.
  • Front panel ON/OFF switch.
  • Front panel ON/Standby LED.
  • Output channel activity indicator LEDs.
More Information
Specification
  • Requires GLM 5 or later (release in Jan 2024)
  • Input audio format: ST2110, AES67, Ravenna protocols.
  • Supports SMPTE ST2110 protocol suite for broadcast applications.
  • Output audio format: AES3. (via DSub & 2x XLR Sub and Aux Feeds)
  • Output sampling rate follows the input sample rate.
  • Supported sampling rates (fs) : 44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz.
  • Supported word lengths: 16 / 24 / 32 bits.
  • Frequency response, –1dB: 1 Hz – (fs/2) kHz.
  • THD+N, 1 kHz tone 0 dBFS: –140 dBFS / 0.00001%.
  • Mains voltage: 100 – 240 V.
  • Mains frequency: 50 – 60 Hz.
  • Power consumption: <2 W (ISS), 12 W max (normal).

USER INTERFACE

  • GLM software provides configuration control for audio management of SAM Monitoring systems and access to the HTML web server inside the 9401A for configuration of audio streams and advanced configuration (e.g. setting the IP address, ST2022-7, PTP, NMOS, statistics).
  • 9401A supports automatic discovery on IP network (Zeroconf) and device IP address assignment (DHCP).
  • To enable audio, the user assigns audio streams from source device to the 9401A, using GLM software link or ANEMAN software, and the audio stream setup information is saved to the device.

CONNECTORS

  • Mains connector: IEC type C14.
  • Ethernet: RJ45, CAT5 or better.
  • 8 x AES output: DB25, AES59 compatible pinout.
  • Subwoofer output: XLR male.
  • Auxiliary output: XLR male.
  • AES output impedance: 110 Ω differential.
  • AES output level: 2.5 Vpp.

WARRANTY
2 years unregistered, and 5 years (in total) for registered users.

 

  • Mains Cable (UK)
  • 5m GLM network cable
  • Quick Setup Guide
  • Manual via QR Code