This site uses cookies to provide you with the great user experience. Find out more here. By using this site you consent to use our cookies.
Datavideo PTR-10MKII Robotic Pan/Tilt Head
Robotic Pan Tilt Head
The PTR-10 is a robotic pan-tilt head designed to turn any block camera into a PTZ camera. With a weight of 3.4kg, it can be placed on a tripod or mounted on the wall/ceiling.
The PTR-10 is a robotic pan-tilt head designed to turn any block camera into a PTZ camera.
Using the idea of Datavideo PTC series of cameras, PTR-10 can provide accurate Pan Tilt position information for users to track the movement. While combining the tracking information with TVS-2000A, it could bring up a lot of possibilities to use other cameras to do tracking in the virtual studio.
With a weight of 3.4kg, it can be placed on a tripod or mounted on the wall/ceiling.
The PTR-10 MARK II can be controlled by the included IR controller, VISCA protocol controller, Datavideo RMC-180 Camera controller, RMC-300A Universal Remote-Control Panel, and compatible with DVIP over Ethernet and other integration solutions such as Crestron.
Multiple Signal Interface
PTR-10 MARK II supports a lot of signal interface for passing through the remote head. Amongst these interfaces are SDI, HDMI, RS-232, RS-422, DVIP, Tally, and LANC.
Cost-Effective
PTR-10 MARK II makes the change from regular camcorder cameras to remote controlled PTZ very cost effective. Multi-camera remote operations can be handled by a single person.
Wide Range of Compatible Cameras Supported
The PTR-10 MARK II implements LanC control that is compatible with a wide range of professional video camcorders, allowing you to select the best camcorders for your needs.
Light Weight, Strong, and Sturdy Design
With a weight of 3.4 kg, PTR-10 MARK II is built from aluminum alloy, making it a very sturdy base for your camera. It can support cameras up to 4 kilograms.
Diversified Controller Options
Compatible with Serial, Ethernet, and Lanc. Datavideo RMC-180 series, and RMC-300A will fit your need.
Support Your Cameras Up to 4 Kg Weight on PTR-10 MARK II
Super strong design. PTR-10 MARK II is built from aluminum alloy, making it a very sturdy base for your camera.
Support 50 Preset Camera Shooting Positions
When your video production requires many different angles and positions, 50 preset camera positions will meet your needs.
Using the IR remote allows you to call up to 50 presets at any time.
When combined with the RMC-300A universal remote controller, the 14 physical buttons can be called at any time.
When using the RMC-180 MARK II remote control, there are 4 physical buttons to call.
PoE++ Supported
You do not need any battery mount on your camera when using PTR-10 MARK II. The PoE++ is building in the PTR-10 MARK II; No extra battery or power needed when operating.
Built-in Tally Light
With the big tally light in the front to show the status of your camera.
D-Tap Connector for DC Output
The D-tap connector is widely used in the broadcast industry as a standard for powering accessories from battery or mains power.
This will make it easier for you to find a ready-made power cable for your specific camera. Included is a D-tap to DC 5.5mm with lock for Datavideo cameras.
Selectable DC voltage output for different cameras (7.4 / 8.4 / 10 / 12V )
- Robotic Pan Tilt Head
- 340° Pan range, 90° tilt range
- Supports both SDI and HDMI input/output
- Especially designed for block cameras with power supported
- Tally light built-in, great for Live events
- Controlled by IR controller, VISCA protocol controller, RMC-180 camera controller, RMC-280 TVS controller and also compatible with serial, Ethernet (DVIP)
- Sharing the same technology with Datavideo PTZ cameras, making it possible to do tracking with TVS-2000A
- 12~18V input, power both the Robotic Head and also the Camera
- DVIP / RS-422 control
Specification |
|
---|
- PTR-10 Mark II Main Unit x1
- DC 12V power adaptor x1
- AC cord x1
- IR Remote Control x1
- DC with Lock to D-Tap Cable x1
- HDMI Cable x1
- SDI Cable x1
- Remote Cable (2.5mm phone-jack to mini-din 8pin) x1
- 1/4" screw x2
- 1/4" to 3/8" screw adaptor x1