ADAM Audio Sub10 MK2 Active Subwoofer (B-Stock)

Active Sub-Woofer

The Sub10 Mk2 and the Sub12 are powerful subwoofers designed to extend the low frequency capabilities of any near or midfield monitoring and are ideal matches for ADAM monitors such as the AX- or the SX-Series.

In stock
Part No:
ADAM-SUB10MK2-B-STOCK
£729.00 £607.50
Did you find this item priced lower than £729.00 somewhere else? Yes

ADAM’s Sub10 Mk2 Active Audio Studio Subwoofer provides a powerful and precise sound with the transparency for which the brand’s highly-acclaimed products are notorious.

Redesigned for optimum performance and studio-level efficiency, the ADAM Sub10 Mk2’s features are unparalleled in the market. When combined with ADAM AX or SX series monitors this subwoofer is well suited to a studio of any size.

Emphasis has been placed on using the Mk2 on to extend the low frequency capabilities of any near or midfield monitoring system to 25Hz. As such, a robust special woofer with extended cone travel and a durable coil have been optimised for pinpoint reproduction from a bass reflex enclosure.

The ADAM Sub10 Mk2 is built around a 200W Ice power amp - utilising PWM technology to keep both amp and power supply cool over lengthy studio sessions. This enables maximum power output and an overall efficiency >90% without endangering the driver or electronics.

A 10” woofer gives the Sub10 Mk2 a frequency range of 25Hz – 150Hz. Additionally, a down-firing bass reflex tube mitigates unnecessary ventilation noise.  In addition, a precise combination of low cutoff frequency (-3dB at 25Hz) and an undistorted high sound pressure level (113dB at 1m) is provided. ADAM subs can also be chained together for larger rooms or higher levels. All inputs and outputs have both XLR and RCA (cinch) connectors.

Panel/Controls

All subwoofers up to the Sub2100 feature a number of controls to adapt to different room acoustics and requirements. 

 

All units have a level control that varies from -60dB to +6dB, a phase ±180° switch and variable upper frequency barrier control (50-150Hz), a switchable 85Hz high pass filter for the satellite output. In addition, there is a ‘signal-on/continuous’ switch. This provides the option of automatic power up whenever the subwoofer receives a signal and automatic power off after 15 minutes of no signal.

More Information
Specification

Subwoofer

  • Number: 1
  • Basket Ø: 10" (260 mm)
  • Voice coil Ø: 2" (50 mm)
  • Cone material: Paper


Built-in Amplifiers

  • Subwoofer: 1
  • Amp. power RMS / music: 200 W / 300 W

 

Input connectors

  • Analog: XLR / RCA


General data

  • Frequency response: 25 Hz - 150 Hz
  • THD > 60 Hz: ≤1 %
  • Max. peak: ≥113 dB
  • Crossover frequencies: 50 - 150 Hz
  • Input impedance: 10 KOhm
  • Warranty: 5 Years


Dimensions and Weight 

  • Weight: 21 kg
  • 560 mm x 300 mm x 400 mm