Specialist suppliers of pro audio/video equipment to the film,
post-production, broadcast and music recording industries.

Dynaudio PRO M3 VE Bi-amped Main Monitor - Left

3-Way Main Studio Monitor
Part No: DYN-M3VEL

M3 is the ultimate main monitoring solution, combining world-class driver and cabinet technology from Dynaudio with cutting-edge signal processing and amplification from Lab.gruppen and Lake.

Usually ships within 3-5 days shipped within 3-5 days
£6,950.00 £5,791.67 ex VAT
You will earn 5791 eDiscs for buying this product
£6,950.00 £5,791.67 ex VAT
Dynaudio PRO

Product Description


The Dynaudio Professional M3VE monitor system that takes monitoring to a whole new level with a significant upgrade from its predecessor - the renowned M3A 3-way monitor. Two speakers are powered by a single four channel Lab.gruppen PLM 12k44 amplifier, using the integrated Lake active cross-over between LF and MF, while passively filtering the MF/HF cross-over point.

With Dynaudio ESOTAR² driver technology, M3VE takes over where most other monitor systems give up. Attention to detail, underpinned by a 22Hz - 21kHz frequency response and beyond 133dB SPL, M3VE leaves no room for desire in terms of resolution, range or power.

Please visit http://labgruppen.com/series/plm-series for more information on the amplifier.


  • Unique linear phase frequency response
  • Frequency Response: 20Hz - 25kHz
  • Dual 12" ESOTAR² Woofers, aluminum voice coil
  • Dual 6" Midrange drivers, MSP cone, 75mm aluminum voice coil
  • 1.1" (28mm) ESOTAR² Soft-dome tweeter, aluminum voice coil
  • Max. SPL (short term peak @ 1m): 133 SPL
  • Heavy internal damping for minimum cabinet resonance
  • Dimensions: 555mm (W) x 775mm (H) x 505mm (D)
  • Weight: 143 lbs./ 65 kg.


Additional Information

  • System: 3-way Active Main Monitor
  • Frequency Response (+/- 3 dB): 22 Hz - 21 kHz
  • Peak SPL 1m, pair (IEC Short Term): > 133 dB peak
  • Amplifier minimum: 2 x Lab.gruppen PLM10000Q
  • Resonance Frequency: 24 Hz
  • Internal Cabinet Volume: 145 liters
  • Bass Principle: Bass reflex
  • Amplifier: 1/2 Lab-gruppen PLM10000Q (2 channels pr speaker). Preset: M3VE V05
  • Tweeter: Esotar² 28 mm soft dome Magnetic fluid, Metal rear chamber, Pure alu wire voice coil, 4 mm die-cast alu front, Neodym magnet material
  • Midranges: 15 cm with 75 mm diameter pure aluminum wire voice coil, one-piece molded MSP cone
  • Woofer: Esotar 30 cm with 75 mm diameter pure copper wire voice-coil, MSP-cone, long stroke
  • Weight: 65 kg
  • Dimensions (WxHxL): 555 x 775 x 505 mm
  • Cabinet: 25mm MDF, strategically braced and damped. Low turbulence reflex-ports. Separate chambers for each woofer.
  • Crossover: Woofers/hightone: active dsp-based, in-amp Lake processor. Midrange/tweeter: passive wir air-coils only, low dielectrium capacitors and zero-compression resistors.


Technical Specifications - 12k44

  • Model: 12k44
  • Number of amplifier channels: 4
  • Max out Power per Channel (4 ohms, all channels driven): 3000 W
  • THD + N at 1 kHz and 1 dB below clipping: < 0.04 %
  • Dynamic Range: > 114 dB
  • Channel separation (Crosstalk) at 1 kHz: > 70 dB
  • Inputs: Analog, AES/EBU & Dante
  • Analog Input Sample Rate / Resolution: 96 kHz / 24 bit
  • Weight: 16.5 kg (36 lbs)
  • Dimensions (WxHxD): 483 mm (19"), H: 88 mm (2 U), D: 424 mm (16")