Skip to the beginning of the images gallery

TV Logic LUM-181G LCD Monitor

18’’ 12G-SDI Input Full HD Monitor

The new LUM-181G monitor supports 3G/6G/12G-SDI input with a native 1920 x 1080 LCD with SD/HD/UHD/4K input support, this monitor can be anywhere including field production applications.

Part No:

LUM-181G

In Stock

£4,550.00 £3,791.67

Did you find this item priced lower than £3,791.67 somewhere else? Yes

Description

The new LUM-181G monitor supports 3G/6G/12G-SDI input with a native 1920 x 1080 LCD with SD/HD/UHD/4K input support, this monitor can be anywhere including field production applications.

HDR Monitoring on the 1000nits Display
The LUM-181G acheives the peak luminance 1000nits, which enables the monitor to display the HDR content faithfully. The LUM-181G supports PQ and HLG as HDR EOTF.

Optimum Colour Settings
If you select the desired colour standard among HD, UHD, DCI-P3, PQ, Dolby-PQ, HLG, the pre-set values for each paramater are automatically applied to display the imafe in the optimum quality.

Luma(Y') Zone Check
Displays the Luma(Y') level of the input image in colours. Each pixel's Y' analysed and changed to a certain colour or zebra pattern according to the index on the right side of the screen.

User Aspect
This function allows the user to adjust the Width and Height display ratio.

EETF (Electrical-Electrical Transfer Function)
This function provides a toe and knee to gracefully roll off the highlights and shadows providing a balance-between preserving the artisitic intent and mainting details.

Precise Colour Reproduction with Wide Colour Gamut
The LUM-181G complues with the DCI-P3 colour space with gamut ratio 112% and gamut coveragde 97%. And, this monitor can display 1.073 billiion colours. The advanced calibration software of TVLogic ensures the accurate colour reproduction.

Waveform & Vector Scope
The LUM-181G supports the various modes of Waveform and Vector Scope.

Features

18.5" FHD Panel + 4K Interface
HDR Emulation (PQ, HLG)
12G-SDI Single Link 4K/UHD
3G-SDI Quad-Link Square Division & 2-S.I. 4K/UHD
Waveform / Vectorscope
16ch Audio Level Meter
Focus Assist
Marker
Timecode Display
UMD Display
Blue/Mono Only
Various Aspect
Luma(Y’) Zone Check
Range Error
Closed Caption (CC-608, CC-708)
H/V Delay
Tally

Specification

More Information
Specification	Size: 18.5"   Resolution: 1920 x 1080 (16:9) Pixel Pitch: 0.213(H) x 0.213(V) mm   Colour Depth: 16.7M Colours (True 8 bit) Viewing Angle: 178 ̊(H)/178 ̊( V )  Luminance of white: 500nits Contrast Ratio: 1000 : 1 Display Area: 408.96(H) x 230.04(V) mm Input 4 x BNC: 12G/6G/3G/HD-SDI A/B, 3G/HD-SDI C/D Channel Input 1 x HDMI: HDMI(2.0) Input Output 4 x BNC: 12G/6G/3G/HD-SDI A/B, 3G/HD-SDI C/D Channel (Active Through Out) Input Signal 12G-SDI: 12Gb/s 6G-SDI: 6Gb/s 3G-SD: 2.970Gb/s HD-SDI: 1.485Gb/s HDMI:2160p(60)/1080p(60)/1080i(60)/720p(60)/ 480i(60)/480p(60)/576i(50)/576p(50)   SDI Input Signal Formats SMPTE ST 2082: 3840x2160 (60/50/30/25/24p)  SMPTE ST 2081: 3840x2160 (30/25/24p)  SMPTE ST 2036-1:2009: 3840×2160(23.98/24/25/29.97/30/50/59.94/60p) SMPTE-425M-A/B: 1080p(60/59.94/50/30/29.97/25/24/23.98/ 30sF/29.97sF/25sF/24sF/23.98sF), 1080i(60/59.94/50) SMPTE-274M: 1080i (60/59.94/50), 1080p (30/29.97/25/24/24sF/23.98/23.98sF) SMPTE-296M: 720p(60/59.94/50)  SMPTE-260M: 1035i (60/59.94) SMPTE-125M: 480i (59.94)  ITU-R BT.656: 576i (50) SMPTE ST 2048-2:2011: 2048x1080(23,98/24/25/29.97/30p/psf, 47.95/48/50/59.94/60p) Audio In: Embedded Audio, Analog Stereo(Phone Jack) Audio Out: Internal Speaker(Stereo), Analog Stereo(Phone Jack) Power: DC 12V / 24V / AC 100~240V(50~60Hz) Power Consumption (Approx.): TBD Included Accessories: AC Power Cord, Table Stand, Control Knob Cap, Carry Handle Main Body Dimensions Main Body: 442.5 x 309 x 84 (mm) / 17.42 x 12.16 x 3.3 (inch) With Stand: 489.3 x 332.8 x 137.5 (mm) / 19.26 x 13.1 x 5.41 (inch) Weight: 6.52kg / 14.37lbs