Teradek Bolt 4K MAX Wireless Transmitter - Gold Mount

12G-SDI/HDMI Wireless Video Transmitter Gold Mount - 3000ft

Bolt 4K MAX is the most reliable, highest performance wireless video system Teradek have ever created. Featuring exclusive technology found only in this model, the MAX is designed to be your mission critical wireless workhorse.

In stock
Part No:
TER-10-2121-G
£6,400.00 £5,333.33
Did you find this item priced lower than £6,400.00 somewhere else? Yes

Bolt 4K MAX is the most reliable, highest performance wireless video system Teradek have ever created. Featuring exclusive technology found only in this model, the MAX is designed to be your mission critical wireless workhorse.

Transmit up to an 5,000 ft line of sight with the next-generation Array 4K Panel Antenna.

Fixed Frequency Mode locks onto your designated 5GHz channel for enhanced performance in challenging RF environments.

A unique antenna design provides a clearer wireless signal with faster reconnection times over long distances.

  • Video: Up to 4K60FPS
  • Up to 3000ft range
  • Inputs: 12G-SDI, HDMI 2.0
  • Outputs: 12G-SDI, HDMI 2.0
  • Multicast: Up to 6 RXs
  • Compatible with Bolt 4K 750, Bolt 4K 1500
More Information
Specification

Bolt 4K MAX TX Gold Mount

Video

  • Video Inputs: 
    • 1 x 12G-SDI SMPTE 2082-1 standard / 75 Ω (accepts 12G-SDI, 6G-SDI, or 3G-SDI)
    • 1 x HDMI Type-A receptacle accepts HDMI 2.0 or HDMI 1.4)
  • Video Outputs: 1 x Loopout 12G-SDI SMPTE 2082-1 standard / 75 Ω
  • SDI Ancillary Data Support: Supports transmitting metadata, timecode, and start/stop flags from most camera manufacturers.
  • Color Sampling: SDI: YCbCr 4:2:2, 10-bit/ HDMI: RGB 4:4:4, 8-bit
  • Input Cross Conversion: Yes, HDMI to SDI
  • Delay Tx To Rx: <0.001sec

Supported Resolutions

  • Supported Resolutions: 
    • 4Kp23.98/24/25/29.97/30/50/59.94/60
    • 1080p23.98/24/25/29.97/30/50/59.94/60
    • 1080psf23.98/24/25/29.97/30
    • 1080i50/59.94/60
    • 720p50/59.94/60
    • 480p50 576p59.94/60
    • 480i(NTSC)/576i(PAL)


Video Processing

  • Video Compression: Visually Lossless
  • Video Format Conversion Support:
    • Connect an HD source to the Tx and get a 4K signal out of Rx
    • Connect a 4K source to the Tx, get HD resolution out of Rx
    • You can also mix & match from a single source:
    • 4K signal into Tx can be 4K output from 1x Rx and HD output from a 2nd Rx
    • Input/output configurations are controlled directly on units or via Bolt 4K app
  • Color Correction: None

Audio Processing

  • Audio Format: 48kHz 24-bit PCM

Inputs

  • Audio Input: Embedded SDI/HDMI Audio Input (2 Channel)

Physical

  • Dimensions: 132 x 91 x 27 mm
  • Weight: 
    • Bolt 4K Tx without antennas (no battery plates) = 360g
    • Bolt 4K Tx with 4x antennas (no battery plates) = 408g
    • Bolt 4K Rx without antennas (no battery plates) = 440g
    • Bolt 4K Rx with 5x antennas (no battery plates) = 496g
    • Gold-Mount battery plate set (male+female) = +172g
    • V-Mount battery plate set (male+female) = +220 g
  • Construction: Milled Aluminum(Chassis) and regulation-compliant PCB
  • Mountability: Multiple mounting options with 1/4"x20 and M3 holes

Interfaces

  • Configuration Interfaces: OSD with Menu, Joystick Navigation
  • Switches: On/Off Switch
  • USB Interface Functionality: Upgrade via Micro-USB

Network

  • Antennas: 4 External 2dBi RP-SMA antennas (included)
  • Wireless:
    • Non-DFS Frequencies:
    • 5.190 ~ 5.230 GHz and 5.755 ~ 5.795 GHz
    • DFS Frequencies:
    • 5.270 ~ 5.670 GHz
  • Channel Bandwidth: 14x 40MHz wide channels
  • Rf Channel Selection:
    • Auto, Manual
    • Manual available for non-DFS Channels
  • Encryption: AES-256, RSA-1024 key exchange
  • RF Power: 19 dbm EIRP (4 external 2dBi antennas) (<80mW transmit power)
  • Range: Up to 1500 ft, line of sight
  • Unicast Multicast: Can connect one Transmitter to up to 6 Receivers
  • Noise Rejection:
    • Can coexist with WiFi and 5GHz cordless phones
    • Can operate up to 6 sets in same location

Power

  • Power Input: 2-Pin Circular locking Connector 7-28V DC
  • Battery: None, optional Gold or V mount battery plate
  • Nominal Power Consumption: 20 Watts

Environmental

  • Operating Temperature: 0-40℃
  • 1x Bolt MAX 12G-SDI/HDMI TX Gold Mount
  • 2x Bolt 4K Wire Cover Plate (Machined Anodized)
  • 4x Screw FlatHead Phillips Black Oxide 18-8 S S 0-80 x 1/8in
  • 1x 2pin Conn. to PowerTap - 18in Cable
  • 1x USB Male Type A (Full) - USB Male Type B (Micro) -3ft Cable
  • 1x Ultra Thin HDMI Male Type A (Full) - HDMI Male Type A (Full) 18in Cable
  • 1x SDI 12G BNC to BNC Cable Length: 18in / 46cm
  • 1x PSU 2pin Conn. to 30W AC Adapter (Int) - 6ft Cable
  • 4x Antenna 2dBi WIFI 2.4/5.8GHz (Small Antenna)
  • 1x Teradek Standard Terms and Conditions
  • 1x Insert - Product Register
  • 1x Quickstart Guide - Bolt 4K 750/1500
  • 1x Insert - Bolt 4K A/C Adapter Requirements