Sonifex RB-DA6G 6 Way Stereo Distribution Amplifier

6 Way Stereo Distribution Amplifier With Output Gain Control (1U)

The RB-DA6G is a 1U rack-mount high performance 6 way stereo distribution amplifier for splitting a source into a number of different outputs.

Part No:
RB-DA6G
Usually Ships in 2-3 Days
£519.00 £432.50
Did you find this item priced lower than £432.50 somewhere else? Yes

The RB-DA6 is a 1U rack-mount high performance 6 way stereo distribution amplifier for splitting a source into a number of different outputs. The RB-DA6 has 1 stereo input and 6 stereo outputs. It can also be configured so that 1 mono input can be distributed to 12 outputs by use of a switch which is recessed on the front panel to prevent it being accidentally knocked.

The XLR-3 inputs and outputs are electronically balanced and can be wired unbalanced. Each output is individually buffered so that a short circuit on one output won’t affect the others.The left and right input gain controls (normalising) are pre-set potentiometers accessible through the front panel.

The output gain may be varied from -8dB to 18dB which is useful for normalising consumer and professional signals to give outputs of -15dBu and 0dBu respectively.

It is identical to the R8-DA6 with the addition of individual output gain adjustment, instead of global stereo gain adjustment.

More Information
Specification

Audio Specification

  • Maximum Input Level: +28dBu
  • Maximum Output Level: +28dBu
  • Frequency Response: 20Hz to 20kHz ±0.1dB (600Ω load, ref 1kHz)
  • Gain Range: Adjustable 8dB loss to 18dB gain (L & R adjust)
  • Common Mode Rejection: >66dB typically
  • Input impedance: >20kΩ bridging
  • Output impedance: <50Ω
  • Distortion: 0.01% THD @ 1kHz, ref +8dBu output
  • Noise: -100dB unity gain, ref +8dBu output

Connections

  • Inputs: 2 x XLR 3 pin female (balanced, can be unbalanced)
  • Outputs: 12 x XLR 3 pin male (balanced, can be unbalanced)
  • Mains Input: Filtered IEC, switchable 110-120V, or 220-240V, fused, 6W max
  • Fuse Rating: Anti-surge fuse 100mA 20 x 5mm (230VAC) Anti-surge fuse 250mA 20 x 5mm (115VAC)

Equipment Type

  • RB-DA6G: 6 way stereo distribution amplifier with output gain control

Physical Specification

  • Dimensions (Raw): 48cm (W) x 10.8cm (D) x 4.2cm (H) (1U)
    19” (W) x 4.3” (D) x 1.7” (H) (1U)
  • Dimensions (Boxed): 58.5cm (W) x 22.5cm (D) x 7cm (H)
    23” (W) x 8.9” (D) x 2.8” (H)
  • Weight: Nett: 1.3kg Gross: 1.9kg
  • Nett: 2.9lbs Gross: 4.2lbs