Sonifex AVN-DIO16 Dante to 4 Analogue XLR Outputs Dante

Dante to 4 Analogue XLR Outputs

The AVN-DIO16 is a 4 analogue XLR output to Dante converter in the Sonifex DIO range of Dante input/output devices. It features four balanced analogue XLR outputs and one Neutrik etherCON connector for direct connection to a Dante AoIP network.

Part No:
AVN-DIO16
Usually Ships in 2-3 Days
£580.00 £483.33
Did you find this item priced lower than £483.33 somewhere else? Yes

The AVN-DIO16 is a 4 analogue XLR output to Dante converter in the Sonifex DIO range of Dante input/output devices. It features four balanced analogue XLR outputs and one Neutrik etherCON connector for direct connection to a Dante AoIP network.

The front panel provides a global 0dBFS line-up which can be set to +12dBu, +18dBu or +24dBu to meet your specific requirement via the front panel recessed toggle switch. There are also front panel LEDs to indicate network clock status, AoIP link status and PoE power active.

It’s powered using Power over Ethernet (PoE), using a Neutrik etherCON connector. The AVN-DIO16 uses the latest Audinate Dante chipset so is AES67 and Dante Domain Manager compliant.

  • 4 x Balanced Analogue XLR Outputs
  • 1 x Neutrik etherCON Connector
More Information
Specification

Microphone XLR Output Pin-out

  • Pin 1: Chassis Ground
  • Pin 2: Phase
  • Pin 3: Non Phase

Line Outputs - XLR

  • Input Impedance: 200Ω balanced
  • 0dBFS Line-Up: Selectable +12/+18/+24dBu
  • Frequency Response: 20Hz to 20kHz, +0/-0.5dB (ref 1kHz)
  • THD+N:<-100dBFS, -12dBu (+18dBu=0dBFS mode), 20Hz to 20kHz, 20kHz BW
  • Dynamic Range 120dB, 20kHz BW, Rs=200Ω
  • Cross Talk <-110dB

Network and AoIP

  • AoIP Standard: Dante
  • Channels: 4 receive
  • Flows: 2 receive
  • Sample Rates: 44.1kHz, 48kHz, 88.2kHz, 96kHz
  • Encoding: PCM 16, PCM 24, PCM 32
  • AES67 Support Yes
  • Connectivity: etherCON (RJ45 compatible)
  • Speed: 100Mbps
  • Dante Domain Manager Ready: Yes
  • Clock Source: Internal (PTP Leader) or Network PTP Leader 

    PoE Power
  • Standard 802.3af
  • Class 0
  • PD Power Range 0.44 W to 12.94 W
  • Typical PSE Power Usage 6 W
  • Max PSE Usage 15.4 W

Equipment Type

  • AVN-DIO16: Dante® to 4 Analogue XLR Outputs

Physical Specification

  • Dimensions (Raw): 14.0cm (W) x 13.6cm (D) x 4.2cm (H)
    5.5” (W) x 5.4” (D) x 1.7” (H)
  • Dimensions (Boxed): 17.8cm (W) x 17cm (D) x 5.6cm (H)
    7.0" (W) x 6.7" (D) x 2.2" (H)
  • Weight: Nett: 0.36kg Gross: 0.55kg
    Nett: 0.79lbs Gross: 1.21lbs

Accessories
AVN-DIOBT
AVN-DIOMT
AVN-DIORK
AVN-DIO Large Unit Belt Clip Kit
AVN-DIO Large Unit Underdesk Mount
AVN-DIO 1U 19" Rack Kit (5 x Small DIO or 3 x Large DIO)