Skip to the beginning of the images gallery

Sonifex AVN-DIO14 Dante® to XLR Analogue Stereo Input & Output

Dante to XLR Analogue Stereo Input & Output

The AVN-DIO14 is a Dante to XLR analogue stereo input & output converter in the Sonifex DIO range of Dante input/output devices. It features two balanced analogue XLR outputs, two balanced analogue XLR inputs and one Neutrik etherCON connector for direct connection to a Dante AoIP network.

Part No:

AVN-DIO14

Usually Ships in 2-3 Days

£570.00 £475.00

Did you find this item priced lower than £475.00 somewhere else? Yes

Description

The front panel provides a global 0dBFS line-up which can be set to +12dBu, +18dBu or +24dBu to meet your specific requirement via the front panel recessed toggle switch. There are also front panel LEDs to indicate network clock status, AoIP link status and PoE power active.

It’s powered using Power over Ethernet (PoE), using a Neutrik etherCON connector. The AVN-DIO14 uses the latest Audinate Dante chipset so is AES67 and Dante Domain Manager compliant.

Features

2x Balanced Analogue XLR Outputs
2 x Balanced Analogue XLR Inputs
1 x Neutrik etherCON Connector

Specification

More Information
Specification	Microphone XLR Input/Output Pin-out Pin 1: Chassis Ground Pin 2: Input Phase Pin 3: Input Non Phase Line Inputs - XLR Input Impedance: 5kΩ Unbalanced 0dBFS Line-Up: Selectable +12/+18/+24dBu Frequency Response: 20Hz to 20kHz, +0/-0.2dB (ref 1kHz) THD+N: <-118dBFS, -12dBu (+18dBu=0dBFS mode), 20Hz to 20kHz, 20kHz BW Dynamic Range 120dB, 20kHz BW, Rs=200Ω Cross Talk <-110dB Common Mode Rejection >60dB @ 1kHz Line Outputs - XLR Output Impedance: <200Ω balanced 0dBFS Line-Up: Selectable +12/+18/+24dBu Frequency Response: 20Hz to 20kHz, +0/-0.5dB (ref 1kHz) THD+N: <-100dBu, -30dBFS, 20Hz to 20kHz, 20kHz BW Dynamic Range 120dB, 20kHz BW Cross Talk <-110dB Network and AoIP AoIP Standard: Dante Channels: 2 transmit, 2 receive Flows: 2 transmit, 2 receive Sample Rates: 44.1kHz, 48kHz, 88.2kHz, 96kHz Encoding: PCM 16, PCM 24, PCM 32 AES67 Support Yes Connectivity: etherCON (RJ45 compatible) Speed: 100Mbps Dante Domain Manager Ready: Yes Clock Source: Internal (PTP Leader) or Network PTP Leader PoE Power Standard 802.3af Class 0 PD Power Range 0.44 W to 12.94 W Typical PSE Power Usage 6 W Max PSE Usage 15.4 W Equipment Type VN-DIO14: Dante® to XLR Analogue Stereo Input & Output converter Physical Specification Dimensions (Raw): 14.0cm (W) x 13.6cm (D) x 4.2cm (H) 5.5” (W) x 5.4” (D) x 1.7” (H) Dimensions (Boxed): 17.8cm (W) x 17cm (D) x 5.6cm (H) 7.0" (W) x 6.7" (D) x 2.2" (H) Weight: Nett: 0.36kg Gross: 0.55kg Nett: 0.79lbs Gross: 1.21lbs Accessories AVN-DIOBT AVN-DIOMT AVN-DIORK AVN-DIO Large Unit Belt Clip Kit AVN-DIO Large Unit Underdesk Mount AVN-DIO 1U 19" Rack Kit (5 x Small DIO or 3 x Large DIO)