Rode Stereo VideoMic X Stereo Condenser Microphone

Broadcast-grade stereo on-camera microphone

The Stereo VideoMic X is the ultimate broadcast-grade stereo microphone for on-camera use. Utilising all-metal construction, it is incredibly robust making it ideal for regular professional use, while also providing high levels of resistance to RF interference. The mic features a matched pair of ½” true-condenser capsules, configured in a stacked X-Y configuration, providing a highly-immersive soundscape. Each capsule is supported by the Rycote Lyre shock-mounting system, providing isolation from vibration as well as knocks and bumps.

Part No:
STEREO VIDEOMICX
Usually Ships in 1-2 Days
£599.00 £499.17
Did you find this item priced lower than £499.17 somewhere else? Yes

Digital switching on the rear of the SVMX allows the user to control the level adjustment (-10dB or +20dB), high-pass filter (0/75/150Hz) and an innovative high-frequency boost (+6dB @ XHz) designed to boost the intelligibility of dialogue. In a first for the VideoMic range, professional-grade balanced outputs are available on the side of the body, in addition to the RF shielded 3.5mm stereo output cable. An outer dome structure provides physical protection for the sensitive capsules, while reducing wind noise in the same manner as RODE’s RedDot-winning Blimp.

  • Acoustically matched true condenser capsules
  • Rycote Lyre onboard shock mounting
  • Balanced professional XLR output
  • Heavy-duty, lightweight aluminium construction
  • High Pass Filter 
  • 9V or Phantom Power (P48 - via miniXLR)
  • Level adjustment 
  • High Frequency Boost
  • Includes SC2 TRS cable, pop sheild and wind shield
  • 10 year extended warranty when you register online
More Information
Specification

Acoustic Principle: Pressure Gradient

Active Electronics: JFET impedance converter

Capsule: 0.50"

Polar Pattern: Cardioid

Address Type: End

Frequency Range: 40Hz - 20kHz(selected HPF @0, 75Hz, 150Hz)

Output Impedance: 200Ω

Maximum SPL: 143dB SPL (@ 1kHz, 1% THD into 1KΩ load)

Sensitivity: -32.0dB re 1 Volt/Pascal (25.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz

Equivalent Noise Level (A-weighted): 12dB-A

Power Options: 9V Battery and 48V phantom power

Weight: 300gm

Dimensions: 102mmH x 118mmW x 100mmD

Output: 3.5mm Mini jack and mini XLR (3-pin)

Warranty: 1 year with free extension to 10 years following registration