Skip to the beginning of the images gallery

Rode NT2-A Condenser Microphone Studio Pack

Multi-Pattern Dual 1" Condenser Microphone with Shock Mount and Pop Filter

The NT2-A carries on the tradition forged by the now legendary RODE NT2. A professional large 1" capsule studio microphone incorporating three-position pick-up patterns, pad and high pass filter switches conveniently located on the mic body.

Part No:

NT2APACK

Usually Ships in 1-2 Days

£359.00 £299.17

Did you find this item priced lower than £299.17 somewhere else? Yes

Description

The frequency and transient response of this transducer has been voiced to complement today's modern recording techniques, and yet still evoke the silky smooth character of the legendary microphones of the 50s and 60s. These features provide the flexibility and superlative audio characteristics that make the NT2-A one of the most versatile condenser mics available.

Supplied with the SM6 shock mount, dust cover, microphone cable and DVD hosted by Grammy-nominated engineer and producer John Merchant showing a range of recording techniques specific to the NT2-A.

The RODE NT2-A microphone is designed and made in Australia, and covered by RODE's industry leading 10 year warranty.

Features

Large 1” HF1 gold sputtered capsule

On body control of polar pattern, HPF and PAD

Three position variable polar pattern - Omni, Cardioid or Figure 8

Three position variable High-Pass Filter - Flat, 40Hz or 80Hz

Three position PAD - 0dB, -5dB or -10dB

Ultra low noise

Internal capsule shock mounting

Includes RODE SM6 shock mount, pop filter and dust cover

Designed and manufactured in Australia

10 year extended warranty with online registration

Specification

More Information
Specification	Acoustic Principle: Pressure Gradient Active Electronics: JFET impedance converter with bipolar output buffer Capsule: 1.00" Polar Pattern: CardioidFigure 8 - picks up from the front and rear and rejects sides Omnidirectional - picks up all sides equally Address Type: Side Frequency Range: 20Hz - 20kHz Output Impedance: 200Ω Maximum SPL: 147dB SPL (@ 1kHz, 1% THD into 1KΩ load) Maximum Output Level: 16.0dBu (@ 1kHz, 1% THD into 1KΩ load Sensitivity: -36.0dB re 1 Volt/Pascal (16.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz Equivalent Noise Level (A-weighted): 7dB-A Power Options: +24V phantom power+48V phantom power Weight: 860.00gm Dimensions: 209.00mmH x 55.00mmW x 55.00mmD Output: XLR Output Warranty: 1 year with free extension to 10 years following registration