Rode Broadcaster Condenser Microphone

End-Address Broadcast Condenser Microphone

The RODE Broadcaster is a large diaphragm, end-address condenser microphone designed to provide the ultimate performance for broadcast vocal applications.

Part No:
BROADCASTER
Usually Ships in 1-2 Days
£419.00 £349.17
Did you find this item priced lower than £349.17 somewhere else? Yes

Its rich, full quality tailored response has an emphasised proximity effect that has made it a standard in radio stations the world over. It is equally suitable as a voice-over microphone for film and television

The Broadcaster features an internal pop filter, designed to minimise plosives sounds that can overload the microphone capsule and distort the audio output. In addition to the Broadcaster's native 20Hz-20kHz response, a selectable high-pass filter at 75Hz is available which will prevent low-end noise such as air conditioners and traffic from being recorded.

The Broadcaster features an innovative 'On-Air' indicator on the body that can be wired for external activation by the 'Channel On/Mute' function on many consoles. If not connected to a console or switch, the indicator will remain lit whenever the microphone has power.

The RODE Broadcaster microphone is designed and made in Australia, and covered by RØODE Microphones' industry leading 10 year warranty.

  • HF2 1” capsule with gold plated diaphragm
  • On-Air indicator LED
  • Ultra-low noise
  • Voice tailored low-cut feature
  • Internal pop-filter
  • 10 year extended warranty with online registration
More Information
Specification

Acoustic Principle: Pressure Gradient

Active Electronics: JFET impedance converter with bipolar output buffer

Capsule: 1.00"

Polar Pattern: Cardioid

Address Type: End

Frequency Range: 20Hz - 20kHz

Output Impedance: 40Ω

Maximum SPL: 128dB SPL (@ 1kHz, 1% THD into 1KΩ load)

Maximum Output Level: 2.0dBu (@ 1kHz, 1% THD into 1KΩ load

Sensitivity: -34.0dB re 1 Volt/Pascal (20.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz

Equivalent Noise Level (A-weighted): 14dB-A

Power Options: +24V phantom power+48V phantom power

Weight: 577.00gm

Dimensions: 167.00mmH x 50.00mmW x 65.00mmD

Output: XLR Output

Warranty: 1 year with free extension to 10 years following registration here

Description

Its rich, full quality tailored response has an emphasised proximity effect that has made it a standard in radio stations the world over. It is equally suitable as a voice-over microphone for film and television

The Broadcaster features an internal pop filter, designed to minimise plosives sounds that can overload the microphone capsule and distort the audio output. In addition to the Broadcaster's native 20Hz-20kHz response, a selectable high-pass filter at 75Hz is available which will prevent low-end noise such as air conditioners and traffic from being recorded.

The Broadcaster features an innovative 'On-Air' indicator on the body that can be wired for external activation by the 'Channel On/Mute' function on many consoles. If not connected to a console or switch, the indicator will remain lit whenever the microphone has power.

The RODE Broadcaster microphone is designed and made in Australia, and covered by RØODE Microphones' industry leading 10 year warranty.