Skip to the beginning of the images gallery

RME ADI-6432 Digital Audio Converter

Bi-Directional MADI to AES/EBU Format Converter

RMEs ADI-6432 offers 64 channels of format conversion from MADI to AES and vice versa. Typical applications include two ADI-6432 used as digital multicore, or one unit used as AES/EBU frontend for the Hammerfall DSP MADI PCI card. Up to 192 kHz at 24-Bit are supported. Built with 2 units height there is enough space for all connectors and control elements.

Part No:

RME-ADI6432

Subject to an extended lead time - please call for further info

£2,999.00 £2,499.17

Did you find this item priced lower than £2,999.00 somewhere else? Yes

Description

Features

RMEs SteadyClock(TM) lets the ADI-6432 use MADI without an additional word clock connection, and guarantees excellent clock quality in every situation. Due to the highly efficient jitter reduction, any clock signal - even AES and word clock - can be improved and refreshed, and subsequently be used as reference clock at the word clock output. Intelligent Clock Control (ICC) will retain the last valid sample frequency in case of a loss of the input signal

The ADI-6432 supplies word clock in Single, Double und Quad Speed, distributes Double Wire 96 kHz signals into the MADI data stream, and even supports the double MADI sample rate (96K frame). The SyncAlign ® and SyncCheck ® technologies known from other RME products ensure perfect synchronization and clear detection of errors. Also multiple units can be stacked and operated sample-aligned, using word clock. All settings are stored when the unit is switched off

A fully automatic input selection between optical and coaxial input offers a useful redundancy mode for critical applications. Extensive status displays give information about lock and sync states, audio content and the physical quality of the incoming signal

The front panel features an exciting and detailed sync and audio state display with 97 LEDs. Furthermore every function has its own keys accompanied by clear function LEDs. Especially in a professional application, exact, quick and direct control and display of all incoming and outgoing signals, including MIDI and RS232, becomes indispensable. Errors can be detected at a glance. The control keys can be locked to prevent accidental changing of settings

Support for up to 192 kHz with MADI and AES

Unique status displays for MADI and AES

Completely remote controlable via MIDI

Transfer of MIDI data via MADI

Transfer of RS232 data

Specification

More Information
Specification	Input MADI: 1 x BNC, 1 x optical Input AES/EBU: 32 x, 4 x per D-sub connector, transformer balanced, highly sensitive input stage (< 0.3 Vpp), SPDIF compatible Output AES/EBU: 32 x, 4 x per D-sub connector, transformer balanced, 4 Vpp Input word clock: BNC, Signal Adaptation Circuit (functional from 1.2 Vpp) Output word clock: BNC, low impedance driver stage, 4 Vpp into 75 Ohms, short-circuit-proof MIDI input and output: Via two 5-pin DIN jacks COM port: RS232 via 9-pin D-sub, 9600/19200/115200 Baud Sync sources MADI AES Word clock Internal Varipitch: by input signal or word clock Sample frequencies: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz, variable (sync/word clock) Sample rate range MADI: 32 - 192 kHz, word clock: 27 kHz - 200 kHz AES: 28 kHz - 200 kHz Jitter: Internal Clock < 1 ns, Word Clock In < 2 ns, AES/EBU In < 2 ns Jitter suppression: >30 dB (2.4 kHz) Jitter sensitivity: all PLLs operate error-free even at 100 ns Power supply: Internal switching mode PS, 100V - 240V AC, 20 Watt Warranty: 2 years Dimensions (WxHxD) 483 x 88 x 200 mm