This site uses cookies to provide you with the great user experience. Find out more here. By using this site you consent to use our cookies.
Neumann KH 420 Active Studio Monitor
Active 3-way Mid-field Monitor
The KH 420 has been designed for use as a mid-field or main monitor. It is particularly well-suited for use in music, broadcast, and post production studios for tracking, mixing, and mastering. The KH 420 can be used free-standing or flush mounted into a wall, and, in multichannel systems, can be mixed freely with other loudspeakers in the range.
Part No:
505988
Usually Ships in 10-14 Days
£4,250.00
£3,541.67
Did you find this item priced lower than
£3,541.67
somewhere else?
Yes
The KH 420 represents the result of using the latest techniques in acoustical, electronic and mechanical design to bring a new benchmark in audio reproduction quality. In-house computer optimized drivers, a waveguide featuring Mathematically Modeled Dispersion (MMD), flexible acoustical controls, various input options, and an extensive mounting hardware range allow the KH 420 to be used in diverse acoustical conditions, with any source equipment, and in a wide variety of physical locations.
- Computer mechanically modeled three-way cabinet design using Low resonance Integral Molding (LRIM) materials
- New in-house simulated magnetically shielded drivers
- Powerful alloy fabric dome tweeter with built-in grille
- Fabric dome, neodymium magnet, midrange driver
- Long throw bass driver with Extremely Linear Force Factor (ELFF) and flow optimized die cast basket
- High-capacity flow-optimized bass reflex ports with pipe damped
- Elliptical Mathematically Modeled Dispersion (MMD) waveguide, with wide horizontal and narrow vertical dispersion
- Two-color dimmable Neumann logo
- Electronics panel with generously dimensioned integrated Accelerated Heat Tunneling (AHT) heat sink
- Powerful analog class AB amplifiers with large headroom and overheat limiting
- Fast-acting independent thermo limiters for woofer, midrange dome and tweeter to protect the voice coils. Woofer soft clip and excursion limiters.
- Production consistency due to individual hand-alignment in final test
- 4-position bass, low-mid and treble acoustical controls and easy to use parametric equalizer
- Wide range input gain and output level controls
- Ground lift
- Optional (DIM 1) digital XLR/BNC inputs and buffered BNC output
- Optional (DIM 1) lipsync delay (0 … 10/12 frames)
- Optional (DIM 1) time-of-flight delay (0 … 400 ms)
- Universal dual (bass and mid/treble) switched-mode power supplies (100 … 240 V)
- Fully documented extensive mounting hardware options
- Optional robust metal grille
- Optional transportation accessories
| Specification | Acoustics −3 dB free field frequency response: 26 Hz - 22 kHz, ± 3 dB Pass band free field frequency response: 28 Hz - 20 kHz, ± 2 dB Self generated noise level at 10 cm: < 20 dB(A) Total harmonic distortion < 0.5 % at 95 dB SPL at 1 m: > 120 Hz Max. SPL in full space / calc. in half space at 3% THD at 1m: 116.4 / 122.4 dB SPL (averaged between 100 Hz and 6 kHz) Bass capability: Max. SPL in half space at 3% THD at 1m: 109.9 dB SPL (averaged between 50 Hz and 100 Hz) Max. short term SPL with IEC-weighted noise (IEC 60286-5) at 1 m, in typical listening conditions: 109 dB(C) SPL Max. short term SPL with music material at 2.3 m, in typical listening conditions (pair): 103 dB(C) SPL (full range) 109 dB(C) SPL (with subwoofer) Max. long term SPL with pink noise at 2.3 m, in typical listening conditions (single/pair): 90 / 96 dB(C) SPL (full range) 90 / 96 dB(C) SPL (with subwoofer)
Analog Input Infrasonic filter: frequency/slope: 9 Hz; 18 dB/oct Input: XLR, electronically balanced Impedance, electrically balanced: 14k Ohms Input gain control (sensitivity): 0 dB to −15 dB Output level control: 94, 100, 108, 114 dB SPL CMRR: > 56 dB @ 100 - 16 kHz Max. analog input level: +24 dBu (18 dBu for analog delayed) Digital Input (when optional DIM 1 accessory is fitted) Format BNC: AES3, S/P-DIF Impedance BNC, unbalanced: 75 Ω (input/output) Format XLR: AES3 Impedance XLR, balanced: 110 Ω (input) Input switching: Analog, Digital A, Digital B, Digital A+B (all available with and without delay) Digital converter: resolution, design: 16 … 24-bit DAC, Δ∑ Digital converter: sampling rate: 22.05, 24, 32, 44.1, 48, 64, 88.2, 96, 176.4, 192 kHz Digital sensitivity: −18 dBFS = 100 dB SPL at 1 m A-D-A, D-A dynamic range: >116 dB(A), >123 dB(A) THD+N: analog delayed, digital: < -104 dB, < -106 dB Maximum Audio-Video/lip sync and Time-of-Flight delay: 409.5 ms/ 140.87 m (462' 2") Audio-Video/lip sync max. frames: 10.2 (40 ms) frames, 12.3 (33 ms) frames Resolution: time/distance: 0.1 ms / 3.4 cm (1 3/8”) Latency D-A (A-D-A): 0.22 - 1.85 ms (0.54 ms) Delay setting acknowledgement: Neumann logo “Red” 1 flash Delay setting acknowledgement: Neumann logo “Red” continuous flashes Mains Power Supply, voltage; frequency: 100-240 V~; 50/60 Hz
Electronics Bass / Midrange / Treble Class AB amplifiers, cont. (peak) output power*: 295 W (330 W) / 130 W (140 W) / 130 W (140 W) Controller design: Analog, active Crossover - Frequencies: 570 Hz / 2 kHz Crossover - Slope: 24 dB/oct Equalization - Bass: 0; -2.5; -5; -7.5 dB Equalization - Mid: 0; -1.5; -3; -4.5 dB Equalization - High: 1; 0; -1; -2 dB Parametric Equalizer: Bypassable Parametric Equalizer - Gain: +4 ... -12 dB Parametric Equalizer - Frequency: Bypass, 25 ... 80 Hz, 50 ... 160 Hz, 100 ... 320 Hz Parametric Equalizer - Q: 1 ... 8 Protection circuitry: Excursion limiter: Low Peak limiter: Low Thermo limiters: Low, Mid and High Overheat: Amplifiers Displays, indicators - power on: Neumann logo “White” Displays, indicators - limit / clip: Neumann logo “Red” Mains Power Supply, voltage; frequency: 100-240 V~, 50/60 Hz Power consumption - idle: 60 W (+5 W when DIM 1 fitted) Power consumption - full output: 800 W
Mechanics Cabinet surface finish, colour: Painted wood and polyurethane, metallic anthracite. Aluminum electronics panel, Black. Baffle cover: Optional removable metal grille Operating conditions: +10° C to +40° C (+50° F to +104° F), <90% RH, non-condensing Transport/storage condition: −25° C to +70° C (−13° F to 158° F), <90% RH, non-condensing Drivers: Magnetically shielded Woofer: 265 mm (10") Midrange: 76 mm (3") Tweeter: 25 mm (1") Cabinet design: Vented, dual ports on front panel Mounting points: 8 x M5 on rear Product dimensions (height x width x depth), mm (inches): 645 x 330 x 444 mm (25 3/8" x 13" x 17 1/2") External volume: 93 liters Product Weight: 35 kg (77 lbs 3 oz) (+ 100 g (3 oz) when DIM 1 fitted) Packed dimensions (height x width x depth), mm (inches): 775 x 610 x 590 mm (23 1/4" x 15" x 14 1/8") Packed weight and cube: 41.0 kg (90 lbs 6 oz), 0.279 m³ |
|---|
