Skip to the beginning of the images gallery

Neumann KH 120 D Active Studio Monitor (Each)

Active Studio Monitor with Digital Inputs

The KH 120 D studio monitor is designed for use as a near-field loudspeaker or as a rear loudspeaker in larger multi-channel systems. The KH 120 D is perfect for tracking, mixing and mastering in music, broadcast, project and post-production studios.

Part No:

505999

Usually Ships in 10-14 Days

£849.00 £707.50

Did you find this item priced lower than £707.50 somewhere else? Yes

Description

The KH 120 D studio monitor is designed for use as a near-field loudspeaker or as a rear loudspeaker in larger multi-channel systems. The KH 120 D represents the latest in acoustic and electronic simulation and measurement technologies to ensure the most accurate sound reproduction possible. It has a Mathematically Modeled Dispersion waveguide (MMD ), flexible acoustical controls, analog class-AB amplifiers, various input formats (analog and digital) and an extensive mounting hardware range. All of this provides the user with the maximum versatility over a wide variety of acoustic conditions, source equipment, and physical locations.

The KH 120 D is perfect for tracking, mixing and mastering in music, broadcast, project and post-production studios.

Features

Powerful titanium fabric dome

Elliptical Mathematically Modelled Dispersion™ (MMD™) waveguide

Composite sandwich cone

Long throw bass driver

Two-colour + dimmable Neumann logo

Robust metal grille

Large front panel ports

Compact aluminum cabinet (magnetically shielded)

Wide horizontal dispersion

Narrow vertical dispersion

One-piece front panel with no discontinuities

Powerful analog amplifiers with large headroom

Production consistency

4-position bass, low-mid and treble acoustical controls

Wide range input gain and output level controls

New mounting hardware options

Display dimmer

Ground lift

Universal switched-mode power supply (100 … 240 V)

Separate woofer and tweeter electronic peak limiters and thermal-protection circuitry

Specification

More Information
Specification	Acoustics Free field frequency response: 52 Hz … 21 kHz, ± 3 dB Pass band free field frequency response: 54 Hz … 20 kHz, ± 2 dB Self-generated noise (with input gain set to 100 dB for 0 dBu): < 20 dB(A) at 10 cm Total harmonic distortion < 0.5 % at 95 dB SPL at 1 m: > 100 Hz Max. SPL in full space / calc. in half space at 3% THD at 1m: 105.1 / 111.1 dB SPL (averaged between 100 Hz and 6 kHz) Bass capability: Max. SPL in half space at 3% THD at 1m: 104.8 dB SPL (averaged between 50 Hz and 100 Hz) Max. short term SPL with IEC-weighted noise (IEC 60268-5) at 1 m, in typical listening conditions: 107 dB(C) SPL Max. short term SPL with music material at 2.3 m, in typical listening conditions (pair): 97 dB(C) SPL (full range) 104 dB(C) SPL (with subwoofer) Max. long term SPL with pink noise at 2.3 m, in typical listening conditions (single/pair): 88 / 93 dB(C) SPL (full range) 89 / 94 dB(C) SPL (with subwoofer) Electronics Woofer amplifier, cont.(peak) output power: 50 W (80 W) Tweeter amplifier, cont.(peak) output power: 50 W (80 W) Controller design: Analog, active Crossover Frequency: 2.0 kHz Crossover Slope (dB/oct.): 24, 4th order Equalization - Bass: 0, −2.5, −5, −7.5 dB Equalization - Mid: 0, −1.5, −3, −4.5 dB Equalization - High: +1, 0, −1, −2 dB Protection circuitry: Limiter: low, high Infrasonic filter frequency; slope: 30 Hz; 6 dB/oct. Analog Input Impedance, electrically balanced: 10k Ohms in position 94/108 dB SPL at 1 m 20k Ohms in position 100/114 dB SPL at 1 m Input gain control (sensitivity): 0 dB to −15 dB Output level control: 94, 100, 108, 114 dB SPL CMRR: >56 dB @ 15 kHz Maximum input level: 24 dBu (18 dBu for analog delayed) Digital Input/Output Format BNC: AES3, S/P-DIF Impedance BNC, unbalanced: 75 Ω (input/output) Input switching: Analog, Digital A, Digital B, Digital A+B (all available with and without delay) Digital converter: resolution, design: 16 … 24-bit DAC, Δ∑ Digital converter: sampling rate: 32 … 192 kHz Digital sensitivity: −18 dBFS D-A dynamic range: 120 dB Audio-Video/lip sync and Time-of-Flight delay range: 0 … 409.5 ms Audio-Video/lip sync max. frames: 0 … 10.2 (40 ms) frames, 0 … 12.3 (33 ms) frames Resolution: time/distance: 0.1 ms / 3.4 cm (1 3/8”) Latency D-A (A-D-A): 0.22 - 1.85 ms (0.54 ms) Displays and indicators - power on: Neumann logo “White” Displays and indicators - limit/clip: Neumann logo “Red” Displays and indicators - digital error: Neumann logo “Red” flash Mains Power Supply, voltage; frequency: 100-240 V~; 50/60 Hz Power consumption – Idle: 40 W Power consumption – Full output AC: 200 W Mechanics Cabinet surface finish, color: custom: Painted aluminium,metallic anthracite (RAL 7021) Operating conditions: +10° C to +40° C (+50° F to +104° F), <90% RH, non-condensing Transport/storage conditions: −25° C to +70° C (−13° F to 158° F), <90% RH, non-condensing Drivers: Magnetically shielded Woofer: 130 mm (5.25”) Tweeter: 25 mm (1”) Mounting points: 2 x M8 on rear panel Product dimensions (height x width x depth), mm (inches): 277 x 182 x 220 mm (10 7/8” x 7 1/8” x 8 5/8”) Packed dimensions (height x width x depth), mm (inches): 415 x 365 x 280 mm (16 3/8” x 14 3/8” x 11”) Internal net volume / external volume: 6.5 liters / 9.7 liters Weight: 6.5 kg (14.3 lbs)