Magewell Pro Convert for NDI to HDMI

Standalone NDI® Decoder

Standalone NDI to HD HDMI decoder, 1-channel, PoE

Part No:
64100
Usually Ships in 1-2 Days
£432.00 £360.00
Did you find this item priced lower than £360.00 somewhere else? Yes

Innovating to Enhance Live Production Workflows
Adopting NewTek’s royalty-free NDI® protocol for encoding and transmission, the Pro Convert family easily and reliably converts video signals such as HDMI and SDI into NDI streams. These NDI streams will be available to all NDI-compatible software and systems on the same network regardless of physical distance, ensuring high-quality, low-latency, IP-based live production experiences superior to traditional live production solutions.

Video-over-IP has Never Been so Simple
Everything you need as a live content producer can fit in a backpack – Pro Convert devices and accessories, a network switch and a laptop. The converter accepts a wide range of signals from source equipment including cameras, production workstations, media players, games consoles and more, creating streams that are compatible with the large and growing number of NDI-enabled software applications.

Easy-to-Use; Zero Configuration
Pro Convert devices automatically detect your network and the video input signal format, with no manual network configuration nor source format selection needed. Plug in the cables, and it just works!

Scalable Solution with Lower Investment in Equipment
With Pro Convert devices, your Video-over-IP infrastructure can be expanded to any number of inputs. Simply add one more Pro Convert to add one channel of input to your NDI-based production network, with no need for expensive equipment like dedicated video routers or matrixes.

Fits Easily and Non-Disruptively into Your Existing Workflows
Simply connect a Pro Convert device to your existing video source to make your production workflow IP-enabled. The converter provides a loop-through interface so you can still connect your source to the same subsequent video equipment without affecting your original workflow, minimizing cost and integration effort.

  • Convert NDI® stream to HD HDMI signal
  • HDMI Output Feature: Support up to 4096x2160 60fps HDMI output
  • NDI Decoding Features: Support up to 150M pixels/decoding

Basic features:

  • FPGA-based Video Processing
  • Superb Signal Compatibility
  • Remote Control PTZ Cameras via IP
  • Connect to the computer using RNDIS when Ethernet is not available
  • Support 8 channel IEC60958 audio streams; support Audio 5.1 and 7.1
  • Fail-over to swicth another source if the current one fails
  • Intuitive web-based UI for quick setup and control
  • Power via PoE or USB power supply
  • Tally Lights
  • 1/4"-20 Mounting Hole
  • Accessed by multiple users simultaneously; different user permissions to ensure safety
  • Low-noise fan for colling 24x7 continuus work
  • Online Firmware Update
  • Rotary switch to set the ID for each device
More Information
Specification

Supported Web Browser (tested)

  • Microsoft Internet Explorer 11
  • Microsoft Edge
  • Mozilla Firefox version 61 and above
  • Google Chrome version 49 and above
  • Apple Safari 11.1 and above
  • Opera 55.0.2994.44 and above

 

Output Interfaces

HDMI

  • DVI-D 1.0
  • HDMI 1.4
  • HDMI 2.0

 

Storage Interface

  • SD Card (functions to be developed)

 

Screw Mounting Hole

  • 1⁄4–20 mounting hole

 

Network Interfaces

  • 10/100/1000Mbps Ethernet
  • IEEE 802.3af PoE

 

USB Interface

USB2.0 Type B

  • 5V/2.1A power supply
  • USB RNDIS/ECM

USB3.0 Type A

  • Support connecting peripherals (keyboard and/or mouse) to customize the video and audio settings

 

Control Buttons

  • MENU: press to display the menu, or cycle through the options
  • SELECT: press to display the menu, enter current option, or confirm the selection

 

HDMI Output Features

  • Support up to 4096x2160 60fps HDMI output
  • Support 96KHz 16bits 8-channel audio streams
  • Support delivering videos at the preferred video format according to the EDID of the connected monitor

 

Stream Decoding Features

  • Support decoding streams of NDI, RTSP, HTTP, RTMP Pull/Push and TS over UDP/SRT/RTP
  • Support decoding videos in H.264 and H.265 format
  • Support up to 150M pixels/s decoding
    • When receiving 2K NDI® stream, the device could decode and convert it to 2K 60fps
    • When receiving 4K NDI® stream, the device could decode and convert it to 4K 15fps
  • Support modifying configurations using the Web UI or the Options menu
  • Setting Video OSD composition, including
    • Source name & resolution
    • Tally indicators
    • Audio meter
    • Audio meter scale
    • Center cross
    • Safe area
  • Video scaling, frame rate and aspect ratio conversion
  • Video colour format conversion
    • Auto or manual selection of input colour format
    • Support YUV BT.601, YUV BT.709 colour formats
  • Video vertical and mirror flip
  • Remote controlling the PTZ device connected to the video source
  • Setting audio gain, sample rate and channels

 

Device Name

  • Support setting the device name shown in the system using Web UI. By default, the device name is ‘Pro Convert’.
  • Support setting board-index, from 0 to F, through the on-board rotary switch

 

Firmware Upgrade

  • Support for manual update using Web UI

 

LED Indicator

Power LED status indicator

  • On: power connected
  • Off: power unconnected

Decode LED status indicator

  • On: decoding in progress
  • Blinks: decoding error
  • Off: source unselected

 

Form Factor

  • 100.9mm (L) x 60.2mm (W) x 23.3mm (H)

 

Accessories

  • USB 2.0 A to B Cable
  • 5V/2.1A power adaptor
  • L-bracket

 

Power Consumption

  • 5V max current:~1.1A
  • Max power consumption:~5W

 

Working Environment

  • Operating temperature: 0 to 45 deg C
  • Storage temperature: –20 to 70 deg C
  • Relative Humidity: 5% to 90% non-condensing

 

Warranty

  • 2-year warranty