Skip to the beginning of the images gallery

Magewell Pro Convert for NDI to AIO

Standalone NDI to HDMI and SDI Decoder

Converts a live NDI stream into HDMI and SDI

Part No:

64210

Usually Ships in 1-2 Days

£456.00 £380.00

Did you find this item priced lower than £380.00 somewhere else? Yes

Description

Innovating to Enhance Live Production Workflows
Adopting NewTek’s royalty-free NDI® protocol for encoding and transmission, the Pro Convert family easily and reliably converts video signals such as HDMI and SDI into NDI streams. These NDI streams will be available to all NDI-compatible software and systems on the same network regardless of physical distance, ensuring high-quality, low-latency, IP-based live production experiences superior to traditional live production solutions.

Video-over-IP has Never Been so Simple
Everything you need as a live content producer can fit in a backpack – Pro Convert devices and accessories, a network switch and a laptop. The converter accepts a wide range of signals from source equipment including cameras, production workstations, media players, games consoles and more, creating streams that are compatible with the large and growing number of NDI-enabled software applications.

Easy-to-Use; Zero Configuration
Pro Convert devices automatically detect your network and the video input signal format, with no manual network configuration nor source format selection needed. Plug in the cables, and it just works!

Scalable Solution with Lower Investment in Equipment
With Pro Convert devices, your Video-over-IP infrastructure can be expanded to any number of inputs. Simply add one more Pro Convert to add one channel of input to your NDI-based production network, with no need for expensive equipment like dedicated video routers or matrixes.

Fits Easily and Non-Disruptively into Your Existing Workflows
Simply connect a Pro Convert device to your existing video source to make your production workflow IP-enabled. The converter provides a loop-through interface so you can still connect your source to the same subsequent video equipment without affecting your original workflow, minimizing cost and integration effort.

Features

Convert NDI® stream to HD HDMI and/or 3G SDI signal
Ouput Feature: Support outputting video streams at the optimal resolution for NDI® source automatically

Basic features:

FPGA-based Video Processing
Superb Signal Compatibility
Remote Control PTZ Cameras via IP
Connect to the computer using RNDIS when Ethernet is not available
Support 8 channel IEC60958 audio streams; support Audio 5.1 and 7.1
Fail-over to swicth another source if the current one fails
Intuitive web-based UI for quick setup and control
Power via PoE or USB power supply
Tally Lights
1/4"-20 Mounting Hole
Accessed by multiple users simultaneously; different user permissions to ensure safety
Low-noise fan for colling 24x7 continuus work
Online Firmware Update
Rotary switch to set the ID for each device

Specification

More Information
Specification	HDMI Output Max output: 1920x1080p60 Delivery video within 2K at the preferred video format according to the EDID of the connected monitor Support YUV BT.601, YUV BT.709 signal Support 48KHz 8-channel audio output HDMI interface: HDMI 1.4 SDI Output Max output: 1920x1080p60. Supported output formats are: 1920x1080p 23.98/24/25/29.97/30/50/59.94/60 1920x1080i 50/59.94/60 1280x720p 23.98/24/25/29.97/30/50/59.94/60 720x576i50 720x480i59.94 Support YUV BT.601/709 signal Support 48KHz 8-channel audio output SD/HD/3G-SDI BNC output Support SD (ST 259)/HD (ST 292)/3Ga (ST 425)/3Gb (ST 425)/3Gb-DL (ST 425)/3Gb-DS (ST 425) SDI standards Output 3G-SDI signal and transmitted distance at 130m (427ft) Decoding Features Decoding up to 2Kp60 streams of Full NDI, NDI\|HX, NDI\|HX2, RTSP, HTTP, HLS, RTMP Pull/Push, and MPEG-TS over UDP/SRT/RTP protocols Simultaneously decode and output HDMI and SDI signals H.264/H.265 video decoders AAC/MP3 audio decoders Support NDI 4.x Web UI Management Provide comprehensive information regarding the device and decoded signals in real-time Allow to configure how a signal is decoded and output, including OSD settings, deinterlacing, resolutions, audio gain, sample rate, and channel mapping, as well as the network connection Update firmware Support USB RNDIS/ECM Support IE/Edge/Firefox/Chrome/Safari/Opera web browsers Provide HTTP APIs On-board Control Buttons MENU: press to display the menu, or cycle through the options SELECT: press to display the menu, enter current option, or confirm the selection 16 Position Rotary DIP Switch: set board-index from 0 to F Network Interfaces 10/100/1000Mbps Ethernet IEEE 802.3af PoE USB Interface USB2.0 Type B 5V/2.1A power supply USB RNDIS/ECM LED Indicators Power LED status indicator On: power connected Off: power unconnected Decode LED status indicator On: decoding Blinks: decoding error Off: source unselected Form Factor 100.9mm (L) x 60.2mm (W) x 23.3mm (H) Screw Mounting Hole ¼–20 threaded hole Power Consumption 5V max current: ~1.05A Max power consumption: ~5.5W Working Environment Operating temperature: 0 to 40 deg C Storage temperature: –20 to 70 deg C Relative humidity: 5% to 90% non-condensing