Skip to the beginning of the images gallery

Lynx Technik yellobrik ORX-1802 ST

3Gbit Fiber Optic to SDI Receiver ST Singlemode)

The ORX 1802 is a compact fiber to SDI receiver designed to combat the restrictions involved with the distribution of uncompressed broadcast quality video signals over long distances.

Part No:

ORX-1802-ST

Usually Ships in 1-2 Days

£569.00 £474.17

Did you find this item priced lower than £474.17 somewhere else? Yes

Description

The ORX 1802 is a compact fiber to SDI receiver designed to combat the restrictions involved with the distribution of uncompressed broadcast quality video signals over long distances.

When paired with the fiber optic to SDI transmitters (e.g. yellobrik OTX 1812 or OTX 1842) you have a very cost effective optical transmission / receiver system for signals up to 1080p60 (3Gbit/s), while preserving full uncompressed quality.

The OTX 1812 provides 2 SDI outputs and support for LC, ST or SC singlemode fiber connections as well as an LC version suitable for multimode fiber.

The ORX 1802 will auto-detect and re-clock any 270Mbit / 1.5Gbit and 3Gbit SDI fiber source and convert to an electrical signal. The module is fully compatible with 3Gbit Level A and Level B formats.

Features

Supports SDI video inputs up to 3Gbit/s (1080p60)
3Gbit Level A and Level B support (all formats)
Auto reclocking 270Mbit / 1.5Gbit / 2.97Gbit
2 x SDI outputs
Versions for LC, ST or SC fiber connections
Multimode version available
Input range 1260nm to 1620nm (singlemode)
Input range 780nm to 880nm (multimode)
Supports hot swapping and hot plugging

Specification

More Information
Specification	Fiber Input singlemode 1 x fiber optic Input LC, ST or SC connection SMPTE 297M - 2006 Input range (wavelength) 1260nm to 1620nm RX sensitivity -3dBm to -18dBm RX active LED on side of module Fiber Input multimode 1 x Fiber Optic Input LC Connection SMPTE 297M - 2006 Input range (wavelength) 780nm to 880nm RX sensitivity 0dBm to -15dBm RX active LED on side of module SDI Output 2 x SDI video on 75 Ohm BNC connectors SMPTE 424M, SMPTE 292M, SMPTE 259M, DVB-ASI Multi-standard operation from 270Mbit/s to 3Gbit/s Electrical Return Loss: >15dB from 5MHz to 1.5GHz, >10dB from 1.5GHz to 3GHz Power +12VDC @ 1.3W nominal - ( supports 7 - 16VDC input range ) Physical Size: 140mm x 42mm x 22mm (5.51” x 1.65” x 0.86”) including connectors Weight: 125g (4.4oz) Ambient 5 - 40oC (41 - 104oF) 90% Humidity (non condensing)