Lynx Technik yellobrik CHD 1812

HDMI to SDI Converter with Frame Synchronizer

The CHD 1812 is a versatile and compact HDMI to SDI converter with integrated frame synchronizer. It is an ideal solution for any application which requires a fully synchronized SDI input from an external asynchronous HDMI source.

In stock
Part No:
CHD-1812
£799.00 £665.83
Did you find this item priced lower than £799.00 somewhere else? Yes

The CHD 1812 is a versatile and compact HDMI to SDI converter with integrated frame synchronizer. It is an ideal solution for any application which requires a fully synchronized SDI input from an external asynchronous HDMI source.

The flexible reference sync input will accept any analog video sync format including SD bi-level sync, black burst, colorbars and tri-level HD sync. The sync input is auto detecting and fully cross lock compatible. For example: An SDTV reference can be used to frequency lock an HD HDMI input. If no reference is present, the converter performs a standard asynchronous HDMI to SDI conversion. A pair of stereo analog inputs can be embedded into any AES channel. Audio inputs can be either professional balanced audio with selectable full scale level, or unbalanced consumer line level audio. By default any audio present in the HDMI stream will be embedded into the SDI output or it can be replaced with the external audio signals. 

The module is also compatible with the yelloGUI software package, which provides access to a host of additional internal settings including adjustable video delay for timing purposes. 

An SDI fiber output is also provided with a variety of plug in SFP options available.

Note: For legal reasons, HDMI conversion products from LYNX Technik AG are designed not to capture, convert or transmit video or audio from HDCP copy-protected sources (e.g. Satellite receivers, Cable receivers, Blu Ray Players etc.)

  • Supports SD/HD/3G -SDI formats
  • 3D support
  • Integrated Frame Synchronizer
  • Multi-format sync reference input - cross lock compatible
  • 2 x SDI outputs with optional SDI fiber output
  • HDMI embedded audio passed transparently
  • 2 x external analog audio inputs
  • Professional balanced analog audio inputs or unbalanced line level
  • audio inputs
    • Selectable AES channel for embedding external audio
    • HDMI, reference and audio present LED indication
    • yelloGUI compatible to access additional internal settings
More Information
Specification

HDMI Input

  • 3D compatible input using type A connector
  • For a detailed list of supported formats please refer to the article in our knowledge base ( www.lynx-technik.com > support > tech.support )
  • Up to 8 channels embedded audio in HDMI is passed transparently or replaced with external analog audio input

 

Reference Input

  • SDTV: Analog 525 or 625 bi-level sync, black burst or colorbars HDTV: All tri-level sync standards (exceptions 1080p 50/59.94/60Hz) Cross lock compatible
  • SMPTE 274M, SMPTE 296M - 75 Ohm BNC connector

 

Frame Synchronizer

  • Functional if valid reference is detected, otherwise operates in free run (asynchronous) mode. External audio and HDMI input are frequency locked to external reference, fully cross lock compatible across standards. One frame adjustable delay (in line and pixel increments) using yelloGUI


SDI Outputs

  • 2 x SDI video, 75 Ohm BNC. (both have the same signal - NOT dual link) SMPTE 424M, SMPTE 292M, SMPTE 259M
  • 3G Level A & B-DL & B-DS according to SMPTE ST 425-1 and ST 425-2 (3D) with image formats 1280 x 720 and 1920 x 1080
  • For a detailed list of supported formats please refer to the article in our knowledge base
  • ( www.lynx-technik.com > support > tech.support )
  • Electrical Return Loss: >15dB from 5MHz to 1.5GHz, >10dB from 1.5GHz to 3GHz

 

Fiber Output

  • Optional plug in SFP for optical SDI output (see fiber options table)


Audio Inputs

  • Left and right analog audio using 1/4 inch jack plugs
  • 10k Ohm differential balanced input mode with 24,22,20,18,15,12 dBu
  • full scale (selectable)
  • Unbalanced mode with (line level) at -10 dBV
  • (1/4 inch Jack Plug to RCA connection adapters supplied)
  • Selectable AES channel for audio embedding (1 through 8) (Overwrites any HDMI embedded audio present in selected channel)
  • Frequency response: <+/- 0.2dB 20Hz to 20KHz
  • 48kHz A/D sample rate (free run or frequency locked to reference input)


Power

  • +12VDC @ 4.7W nominal - ( supports 10 - 14VDC input range )


Physical

  • Size: 138mm x 90mm x 22mm (5.43” x 3.54” x 0.86”) including connectors Weight: 230g (8.11oz)


Ambient

  • 5 - 40oC (41 - 104oF) 90% Humidity (non condensing)
  • Module
  • AC power supply
  • RCA adapters
  • HDMI + USB cable