Skip to the beginning of the images gallery

Lynx Technik yellobrik CHD 1802

HDMI to SDI Converter

The CHD 1802 is a compact HDMI to SDI converter It is an ideal solution for any application which requires a broadcast quality SDI signal derived from an external HDMI source. Any audio present in the HDMI stream will be embedded into the corresponding channels on the SDI output.

Part No:

CHD-1802

Usually Ships in 1-2 Days

£599.00 £499.17

Did you find this item priced lower than £499.17 somewhere else? Yes

Description

The module is also compatible with the yelloGUI software package, which provides access to a host of additional internal settings Technical Specifications.

An SDI fiber output is also provided with a variety of plug in SFP options available.

Note: For legal reasons, HDMI conversion products from LYNX Technik AG are designed not to capture, convert or transmit video or audio from HDCP copy-protected sources (e.g. Satellite receivers, Cable receivers, Blu Ray Players etc.)

Features

Supports SD/HD/3G -SDI formats
3D support
2 x SDI outputs
Optional SDI fiber output
HDMI embedded audio passed transparently
HDMI present LED indication
yelloGUI compatible to access additional internal settings

Specification

More Information
Specification	HDMI Input 3D compatible input using type A connector For a detailed list of supported formats please refer to the article in our knowledge base ( www.lynx-technik.com > support > tech.support ) Up to 8 channels embedded audio in HDMI is passed transparently SDI Outputs 2 x SDI video, 75 Ohm BNC. (both have the same signal - NOT dual link) SMPTE 424M, SMPTE 292M, SMPTE 259M 3G Level A & B-DL & B-DS according to SMPTE ST 425-1 and ST 425-2 (3D) with image formats 1280 x 720 and 1920 x 1080 For a detailed list of supported formats please refer to the article in our knowledge base ( www.lynx-technik.com > support > tech.support ) Electrical Return Loss: >15dB from 5MHz to 1.5GHz, >10dB from 1.5GHz to 3GHz Fiber Output Optional plug in SFP for optical SDI output (see fiber options table) Power +12VDC @ 4W nominal - ( supports 10 - 14VDC input range ) Physical Size: 123mm x 90mm x 22mm (4.84” x 3.54” x 0.86”) - including connectors Weight: 175g (6.17oz) Ambient 5 - 40oC (41 - 104oF) 90% Humidity (non condensing)