KRK 10S2 Active Subwoofer

Sub Woofer for KRK Rokit and VXT Series Active Monitors

KRK's KRK10s powered subwoofer is the perfect complement to KRK Rokit, VXT, or any other 4"-8" studio monitor. The KRK10s is designed to extend the low-frequency performance of an existing monitor system so that the low-frequency portion of the mix can be properly engineered.

In stock
Part No:
£349.00 £290.83
Did you find this item priced lower than £349.00 somewhere else? Yes

The ideal subwoofer accompaniment to KRK Rokit, VXT, or any other 4"-8" studio monitor is the KRK10S2. Permitting the low-frequency segment of the mix to be properly engineered, KRK’s 10S2 was devised to lengthen the low-frequency performance of an existing monitor system.

Delivering 160W continuous output through a 10" woofer utilising a 2" voice coil, the KRK 10S2 Active Studio Subwoofer is a second generation model housed in an MDF cabinet. Its exterior also features a sleek black vinyl finish.

Precise and commanding low-end impact is guaranteed by the front-firing bass port and characteristic yellow glass-aramid composite woofer. Adding to the polished appearance of the unit, a robust grille shields the woofer. A high-power amplifier and active crossovers offer smooth and accurate reproduction. The 10S2 affords easy adjustment for any monitoring system with a sweepable 50Hz - 130Hz low pass filter. Any standard latching 1/4" footswitch can be plugged in to bypass the 10S2 and direct full range audio to your top monitors.

For true low frequency monitoring in studios great and small KRK subwoofers have, for years, been the choice of industry professionals. The 10S2 now raises the benchmark yet again, setting a new standard for optimum performance and accuracy. Whether you are mixing in a 2.1 or 5.1 surround environment or just seeking to upgrade the low-frequency extension of your existing monitors, KRK’s 10S2 will deliver the low frequency minutiae and accuracy necessary to empower you to create a better mix.

  • New curved design and custom color matches KRK Rokit and VXT monitors
  • Protective Steel front Grill provides protection
  • Power LED provides visual indication of unit's status
  • Bypass footswitch allows for checking mixes with and without subwoofer
  • Integrated crossover matches any main speaker system
  • Ground lift switch tames ground loops
  • Radically Curved Front Baffle Design for Amazing Performance
  • Front-firing port provides low frequency extension without boundary coupling
  • User's manual provides clear setup instructions
  • Scientifically designed front firing port reduces wall coupling and port turbulence
  • Powerful bass reinforcement with KRK's trademark yellow-cone glass-aramid woofer
More Information

Configuration: Front loaded, vented subwoofer

System type: Active Subwoofer

Low-Frequency: 10" glass aramid composite woofer

Frequency Response: 34Hz - 50Hz to 130Hz Variable

Max Peak SPL: 113 dB

Amplifier Class: Class A-B

Power Output: 150 Watts Continuous @ 1% THD+N @ 100Hz

SNR (signal to Noise Ratio): 98dB

Amplifier Distortion (THD+N): ≤ 0.1% @-3dB of Max Power Output 20Hz - 200Hz

Input Impedance (Ohms): 10 kΩ Balanced or unbalanced

Ground Lift: On / Off

Low Pass Frequency: 50Hz to 130Hz

HPF bypass: with footswitch only

Footswitch: Optional

Phase: 0 or 180 degrees

System Volume: -30dB to +6dB

Indicators: Power Input Connectors: Stereo RCA for left and right, Stereo balanced TRS for left and right, stereo balanced XLR for left and right.

LFE input: N/A
Output Connectors: Stereo RCA for left and right, Stereo balanced XLR for left and right. 
AC Power Input: Selectable 110V-120V / 220V-240V

Enclosure Construction: 15mm reinforced MDF

Finish: black vinyl wrap

Port Configuration: Front firing slot port

Grille: Metal Mesh

Dimensions and Weight

(H x W x D): 15" (382mm) x 14" (355mm) x 16.06" (408mm)
Weight: 39 Lbs. (17.7Kg.)

Download 10s User Manual

Download Sub Woofer Set Up Instructions Manual