Skip to the beginning of the images gallery

Focusrite Pro RedNet R1

The desktop remote controller that supercharges every Red interface

RedNet R1 is a desktop remote controller that unleashes the power of Focusrite Red interfaces. It’s designed for professionals who need to adapt their audio configurations quickly to suit the ever-increasing demands of the studio environment. Combine, select and switch audio from any conceivable source to a multitude of common (or user-defined) monitoring environments, and control large groups of speakers from a single set of controls. RedNet R1 is also a Dante-enabled talkback unit, with a powerful headphones output and built-in talkback mic, making it the ideal studio partner.

Part No:

MONF0016

3 In Stock

£849.00 £707.50

Did you find this item priced lower than £707.50 somewhere else? Yes

Description

RedNet R1 enables users to interact with their audio system like never before. It provides the flexibility to control a range of different monitor output setups, ranging from mono through to 7.1.4 surround, including Dolby Atmos® and other immersive audio workflows. Alternatively, completely custom setups of up to 12 outputs can be configured for bespoke speaker configurations. RedNet R1 can be used to control groups of outputs from a Red interface’s multitude of sources and destinations, including from Pro Tools | HD and other DAWs, analogue inputs and outputs, ADAT and S/PDIF connections, and from entire Dante audio ecosystems, simultaneously and interchangeably.

RedNet R1 supports a maximum of eight input sources from 32 available audio channels, across analogue, digital, DAW and Dante connections, and mixes and routes signals to up to 12 monitor output channels. Top-panel control includes level, reference level preset selection, cut, dim, mute and a variety of solo modes. There’s an A/B switch for switching between numerous monitoring presets, and up to four fold-down presets allow fast switching for checking downmixes. Custom cue mixes can be sent to talent from any of the 32 available inputs.

RedNet R1 also features a Dante-enabled talkback section, internal mic-pre and a high-powered headphones output, so you can interact with your Dante system like never before. Up to four talkback destination groups are available when used with a Red interface. (When used with other Dante devices, a single talkback group is available.) RedNet R1 has an internal microphone, or users can connect their own microphone via the rear-panel XLR. The high-fidelity headphone output is powerful enough to deliver high-SPL audio to high-impedance headphones.

RedNet R1 features two LCD displays for highly accurate level metering of the outputs, sources and headphone outputs, and for giving visual cues for navigating around menus. The unit is configured using RedNet Control 2, the software manager designed primarily for ease of use in quickly setting up both simple and complex monitoring and routing configurations. Other features of the RedNet R1 include a quarter-inch jack socket, which accepts a footswitch for talkback management, LFE muting and more. It can be powered via Ethernet to reduce cabling complexity (using the PoE standard), or by a DC power supply. "

Features

Desktop remote controller for Red audio interfaces

The first Dante®, Pro Tools | HD™ and Thunderbolt™ interface system with a monitor controller.

Switch and sum

Supports a maximum of eight channels, each of up to 12 sources per channel, from 32 available audio sources.

Flexible monitor control

Controls include level, reference level, preset selection, cut, dim, mute, A/B switch, and a variety of solo modes.

Monitor fold-downs

Up to four fold-down presets allow fast switching for checking downmixes.

Talkback & headphones functionality

Four destination groups when used with a Red interface, or a single talkback group when used with other Dante devices. High-fidelity output can take its source from a multitude of sources.

Built-in Microphone

RedNet R1 has an internal talkback microphone, or users can connect their own, via the rear-panel XLR.

Precision metering and display

Two LCD displays for highly accurate level metering of the outputs, sources and headphone outputs, and for giving visual cues for navigating around menus.

Software setup with hardware-focussed workflow

RedNet Control is designed for quickly setting up simple or complex configurations.

Footswitch input

Quarter-inch jack socket accepts a footswitch, for talkback management, LFE muting and more.

Power-over-Ethernet (PoE) support

Powered via Ethernet (using the PoE standard), or using a DC power supply."

Specification

More Information
Specification	Internal Talkback All measurements taken at maximum gain unless otherwise stated, Rs = 150Ω Gain Range: 0dB to 55dB Type: Electronically Balanced, Zin = 3kΩ Max. Input Level: +10dBu ± 0.5dB External Talkback All measurements taken at maximum gain unless otherwise stated, Rs = 150Ω Gain Range: 0dB to 55dB Type; Electronically Balanced, Zin = 3kΩ Max. Input Level: +10dBu ± 0.5dB Frequency Response: 20Hz - 20kHz ± 2dB THD + N: < -98dB (0.0012%) @ -1dBFS EIN: < -128dBu 'A'-Weighted (typical) Signal-to-Noise Ratio: -111dB 'A'-Weighted (typical), min gain Common-Mode Rejection Ratio: 50/60Hz CMRR: <-77dB Headphone Output All measurements taken at +19dBm reference level, maximum gain, RL = 600Ω 0 dBFS Reference Levels: +11dBm Frequency Response: 20Hz to 20kHz ±0.5dB THD + N: -100dB (0.001%) @ -1dBFS, Rs = 150R Dynamic Range: 108dB 'A'-weighted (typical), 20Hz - 20kHz Noise in Presence of Signal (NiPoS): > -97 dBu 'A-Weighted' Output Impedance: 5Ω Headphone Impedance: 32Ω - 600Ω Crosstalk Microphone/ Line Crosstalk Mic Input to Headphone Output: < -122dB; 20Hz - 20kHz (all other channels at 0dBFS) Headphone Output to Mic Input: < -84dB; 20Hz - 20kHz (all other channels at 0dBFS) Headphone Crosstalk Left to Right: < -85dB; 20Hz - 20kHz (all other channels at 0dBFS) Right to Left: < -85dB; 20Hz - 20kHz (all other channels at 0dBFS) Digital Performance Supported Sample Rates: 44.1 / 48 / 88.2 / 96 kHz (-4% / -0.1% / +0.1% / +4.167%) at 24 bit Clock Sources: Internal or from Dante Network Master. Rear Panel Connectivity, Pots & Switches Inputs External Talkback Mic Input: 1 x XLR (F) Foot Switch: 1 x 1/4"" stereo jack Outputs Headphone Outputs: 1 x 1/4"" stereo jack Pots & Switches Power Switch: 1 x Switch Talkback Gain Pot: 1 x Pot Talkback Switch: 1 x Tri-State Switch (External Talkback + 48V, External Talkback and Internal Talkback). PSU & Network Connections PSU (PoE and DC): 1 x PoE Input and 1 x DC 12V Locking Barrel Input Connector. Network: 1 x Standard RJ45 connector. Top Panel Indicators LCD Screens: 2 x Screens (Control, Status, Metering & Menus) Control Functions: 2 x Continuous Pot (Level & Dim). 1 x Pot (Headphone Output). 24 x Multi-Function Switches (Sources, Talkback, Monitor Outputs & Menu Items). 12 x Single-Function Switches (Headphones, Sum, Spill, Mode, Mute, Solo, Outputs, A/B, Cut x 2, Dim & Output Lock). Power Power over Ethernet (PoE): Complies with IEEE 802.3af class 0 Power-over-Ethernet standard (PoE A or PoE B compatible) DC Power Supply: 1 x 12V 1.2A DC Power Supply. Power Consumption: PoE: 10.3W - DC: 9W (When using supplied DC PSU) Heat Performance Operating Temperature: Operates at up to an ambient temperature of 40 degrees Celsius Warranty Enjoy three years of warranty Wherever you happen to be in the world, you can rely on a three year warranty if any Focusrite hardware needs repairing or replacing due to a manufacturing fault. Focusrite will send you replacement gear in the UK and the US, and they’ll cover the shipping costs both ways. In the UK, they'll send you a replacement before you return your hardware to them.