Skip to the beginning of the images gallery

Dynaudio PRO M3 XE Quad-amped Main Monitor - Left

3-Way Main Studio Monitor

Dynaudio M3 is the ultimate main monitoring solution, combining world-class driver and cabinet technology from Dynaudio with cutting-edge signal processing and amplification from Lab.gruppen and Lake.

Part No:

DYN-M3XEL

Call for Lead Time

Request a Quote

Did you find this item priced lower than £0.00 somewhere else? Yes

Description

The Dynaudio PRO M3XE monitor system that takes monitoring to a whole new level with a significant upgrade from its predecessor - the renowned M3A 3-way monitor. Each speaker is powered by a four channel PLM 12k44 amplifier from Lab.gruppen.

With the newest and most pristine Dynaudio ESOTAR driver technology, M3XE takes over where most other monitor systems give up. With unsurpassed attention to detail, underpinned by an impressive 22Hz - 21kHz frequency response and beyond 135dB SPL, M3XE leaves no room for desire in terms of resolution, range or sheer power.

Different from its sister monitor M3VE, a set of M3XE's is powered by not one, but two 12k44 Lab.gruppen amplifiers, using the integrated Lake active cross-over processing as well as powering the HF, MF and dual LF woofers by the four independent amplifier channels of the 12k44.

Please visit http://labgruppen.com/series/plm-series for more info.

In short, M3XE surpasses any and all main monitor expectations!

Features

Unique linear phase frequency response

Frequency Response: 20Hz - 22kHz

Dual 12" ESOTAR Woofers, aluminum voice coil

Dual 6" Midrange drivers, MSP cone, 75mm aluminum voice coil

1.1" (28mm) ESOTAR² Soft-dome tweeter, aluminum voice coil

Max. SPL (short term peak @ 1m): 133 SPL

Heavy internal damping for minimum cabinet resonance

Specification

More Information
Specification	System: 3-way Active Main Monitor Frequency Response (+/- 3 dB): 22 Hz - 21 kHz Peak SPL 1m, pair (IEC Short Term): > 135 dB peak Resonance Frequency: 24 Hz Internal Cabinet Volume: 145 liters Bass Principle: Bass reflex Amplifier: 1 Lab-gruppen PLM10000Q (pr. speaker). Preset: M3XE V06 Tweeter: Esotar² 28 mm soft dome Magnetic fluid, Metal rear chamber, Pure alu wire voice coil, 4 mm die-cast alu front, Neodym magnet material Midranges: 15 cm with 75 mm diameter pure alu wire voice coil, MSP-cone, long stroke Woofers: Esotar 30 cm with 75 mm diameter pure cupper wire voice-coil, MSP-cone, long stroke Weight: 65 kg. Dimensions (WxHxL): 555 x 775 x 505 mm Cabinet: 25 mm MDF. Strategically braced and damped. Low turbulence reflex-ports. Separate chambers for each woofer. Crossover: All 4 channels: Active dsp-based in-amp Lake processor. Each channel has impedance-correction providing the best working conditions for the ampflifier. Technical Specifications - 12k44 Model: 12k44 Number of amplifier channels: 4 Max out Power per Channel (4 ohms, all channels driven): 3000 W THD + N at 1 kHz and 1 dB below clipping: < 0.04 % Dynamic Range: > 114 dB Channel separation (Crosstalk) at 1 kHz: > 70 dB Inputs: Analog, AES/EBU & Dante Analog Input Sample Rate / Resolution: 96 kHz / 24 bit Weight: 16.5 kg (36 lbs) Dimensions (WxHxD): 483 mm (19"), H: 88 mm (2 U), D: 424 mm (16")