Dynaudio PRO M3 VE Package (2x M3VE + 1x PLM10000Q)

Main Studio Monitor System

M3 is the ultimate main monitoring solution, combining world-class driver and cabinet technology from Dynaudio with cutting-edge signal processing and amplification from Lab.gruppen and Lake.

Part No:
Usually Ships in 3-5 Days
£24,000.00 £20,000.00
Did you find this item priced lower than £24,000.00 somewhere else? Yes

The Dynaudio Professional M3VE monitor system that takes monitoring to a whole new level with a significant upgrade from its predecessor - the renowned M3A 3-way monitor. Two speakers are powered by a single four channel Lab.gruppen PLM 12k44 amplifier, using the integrated Lake active cross-over between LF and MF, while passively filtering the MF/HF cross-over point.

With Dynaudio ESOTAR² driver technology, M3VE takes over where most other monitor systems give up. Attention to detail, underpinned by a 22Hz - 21kHz frequency response and beyond 133dB SPL, M3VE leaves no room for desire in terms of resolution, range or power.

Please visit http://labgruppen.com/series/plm-series for more information on the amplifier.

  • Unique linear phase frequency response
  • Frequency Response: 20Hz - 25kHz
  • Dual 12" ESOTAR² Woofers, aluminum voice coil
  • Dual 6" Midrange drivers, MSP cone, 75mm aluminum voice coil
  • 1.1" (28mm) ESOTAR² Soft-dome tweeter, aluminum voice coil
  • Max. SPL (short term peak @ 1m): 133 SPL
  • Heavy internal damping for minimum cabinet resonance
  • Dimensions: 555mm (W) x 775mm (H) x 505mm (D)
  • Weight: 143 lbs./ 65 kg.
More Information
  • System: 3-way Active Main Monitor
  • Frequency Response (+/- 3 dB): 22 Hz - 21 kHz
  • Peak SPL 1m, pair (IEC Short Term): > 133 dB peak
  • Amplifier minimum: 2 x Lab.gruppen PLM10000Q
  • Resonance Frequency: 24 Hz
  • Internal Cabinet Volume: 145 liters
  • Bass Principle: Bass reflex
  • Amplifier: 1/2 Lab-gruppen PLM10000Q (2 channels pr speaker). Preset: M3VE V05
  • Tweeter: Esotar² 28 mm soft dome Magnetic fluid, Metal rear chamber, Pure alu wire voice coil, 4 mm die-cast alu front, Neodym magnet material
  • Midranges: 15 cm with 75 mm diameter pure aluminum wire voice coil, one-piece molded MSP cone
  • Woofer: Esotar 30 cm with 75 mm diameter pure copper wire voice-coil, MSP-cone, long stroke
  • Weight: 65 kg
  • Dimensions (WxHxL): 555 x 775 x 505 mm
  • Cabinet: 25mm MDF, strategically braced and damped. Low turbulence reflex-ports. Separate chambers for each woofer.
  • Crossover: Woofers/hightone: active dsp-based, in-amp Lake processor. Midrange/tweeter: passive wir air-coils only, low dielectrium capacitors and zero-compression resistors.



  • Model: PLM10000Q
  • Number of amplifier channels: 4
  • Peak total output all ch. driven: 10800 W
  • Pr. Channel (all ch. driven, 4 ohms): 2300 W
  • THD+N A-to-D @1kHz: <0.00033%
  • Internal Sample Rate: 96 kHz
  • Digital Input S-rates: 44.1, 48, 88.2, 96, 176.4, 192 kHz
  • Limiting: Digitally implemented, zero-overshoot Inter-Sample Voltage Peak Limiting (ISVPL™ ) adjustable in 0.1 V steps from 17.8 to 153
  • Weight: 30 lbs / 13.5 kg
  • Dimensions (WxHxD): 483 mm (19”), 88 mm (2 U), Overall 470 mm (18.5”) deep including handles and rear support