Decimator Design MC-DMON-QUAD

1 to 4 Channel Multiviewer/Quad Splitter with SDI Output for 3G/HD/SD

The MC-DMON-QUAD from Decimator Design is a low cost openGear SDI Quad-Splitter with Custom Layouts and Audio Meters.

In stock
Part No:
MC-DMON-QUAD
£255.00 £212.50
Did you find this item priced lower than £255.00 somewhere else? Yes

The MC-DMON-QUAD from Decimator Design is a low cost openGear SDI Quad-Splitter with Custom Layouts and Audio Meters.  

Warranty for all Decimator Design products is 3 years.

  • 4 independent 3G-A 3G-B/HD/SD-SDI inputs with auto-detection
  • Custom Layouts with various standard layouts
  • Select your output format over SDI
  • Display any format of any frame rate simultaneously
  • Fast switching between inputs using Full-Screen scaling
  • Scaling
  • Turn on/off UMDs/Tallies/Audio Metering
  • Rear Module (extra cost) allows for Dynamic UMD and Tallies via RS422/485 using TSL
  • Horizontal and/or Vertical Image flipping per window
  • Low Latency
  • USB Mini B port for control and firmware updates
More Information
Specification

SDI Input & Output Formats

  • 3G:SMPTE 424M@2.97 and 2.967Gb/s
    • 1080p@60/59.94/50Hz
  • HD:SMPTE 292M/274M/296M@1.485 and 1.435Gb/s
    • 1080i@60/59.94/50Hz
    • 1080p/psf@30/29.97/25/24/23.98Hz
    • 720p@60/59.94/50/30/29.97/25/24/23.98Hz
  • SD:SMPTE 259M@270Mb/s
    • 625i50 (PAL)
    • 525i59.94 (NTSC)


Inputs

  • 4 x (3G/HD/SD)-SDI
  • USB Mini B for control and updates
  • 3-pin connector for UMD and Tallies via RS422/485


LED Status

  • Power / Update
  • 4 x Signal lock and rate


Outputs

  • 1 x SDI (3G/HD/SD)-SDI


Power

  • TBA