Skip to the beginning of the images gallery

Crown DCi 8|300DA 300W Power Amplifier with Dante

Eight-channel, 300W Power Amplifier with Dante / AES67 Networked Audio, 2/4/8/16ÃŽÂ© and 70V/100V

For applications that require Dante or AES67 networked audio, the Crown DriveCore Install DA Series provides a balanced combination of output power, channel count and speaker load flexibility along with proprietary DriveCore technology for superb efficiency and exemplary audio quality.

Part No:

CRO0334

In Stock

£5,900.00 £4,916.67

Did you find this item priced lower than £4,916.67 somewhere else? Yes

Description

The DCi DA Series includes a high-powered DSP with JBL speaker tunings, network control/monitoring, and the ability to drive 2/4/8/16 ohm, 70V and 100V speaker loads. The amp’s advanced capabilities and support for Dante Domain Manager makes it perfect for installations that have standardized on Dante for networked audio transport.

Integrated Dante / AES67 Networked Audio
Simplifies installation by enabling Dante / AES67 networked audio signals to be sent directly to the amplifier. Provides flexibility of installation options available with our expansive line-up of DriveCore Install amplifiers. Includes support for Dante 4.0 firmware for integration with Dante Domain Manager.

Network Configuration, Monitoring & Control
Better monitoring, control and audio manipulation with the HiQnet protocol over standard TCP/IP network. The HiQnet Audio Architect software allows for remote configuration, monitoring, and control of all aspects of the DCi-DA Series amplifiers.

Programmable General Purpose Input/Output Port
GPIO ports can be configured in many different ways, such as volume controls, recall presets, or to report errors to third-party control system.

Digital Signal Processing
DSP capabilities include the following:

LevelMAX Limiters
Input/Output EQ
Crossover
Delay
Matrix Router
Speaker Line Monitoring

Specification

More Information
Specification	Redundant, independent Dante / AES67 ports Primary & Secondary Will accept 48khz or 96khz Capable of sending out Dante / AES67 audio from analog inputs pre/post processing (@ 48kHz) Audio Architect Control and Monitoring DriveCore Amplifier Technology Universal PFC Power Supply DSP 48kHz processing 20 Presets Input router High, medium, and low priority inputs Input delay up to 2s Input EQ Crossover Output EQ Output Delay up to 100ms LevelMAX limiter Load Monitoring Pilot tone Normal Burst Continuous Load Monitoring Sweep Load Monitoring Channel Auto-Standby Speaker Tunings Aux-Port Sleep contact closure Amp Status output Removable air filters Front panel LED indicators AES67 Compatible