Specialist suppliers of pro audio/video equipment to the film,
post-production, broadcast and music recording industries.

Teradek Bolt Pro 1000 Deluxe Kit SDI | HDMI V-Mount Wireless Video Transceiver Set

Deluxe SDI | HDMI Wireless Video Transceiver Set - V Mount 1000ft
Part No: TER-BOLT-965-1V

The Bolt 1000 Range uses a new RF design to Transmit visually lossless video over 300M. The 1000 model offers your choice of 3G-SDI, or dual input models and includes RP-SMA connections for external antennas on the transmitter - this package includes a 1000ft SDI / HDMI V-Mount Wireless Transmitter and Receiver.

Condition: new

in stock
£5,959.00 £4,965.83 ex VAT
You will earn 4965 eDiscs for buying this product
£5,959.00 £4,965.83 ex VAT

Product Description


Bolt Wireless Zero Delay HD-SDI / HDMI Transmission System.

The Teradek Bolt line of latency-free wireless video transmission systems allows you to send uncompressed 1080p60, 4:2:2 video up to 3000ft over the unlicensed 5GHz band. Bolt Pro is multicast capable up to 4 receivers and comes in many varieties, including Mid Range BOLT / Pro 500 the long range Bolt Pro 1000, and the Ultra long range Bolt Pro 3000.

The BOLT Pro 500 /1000 /3000 have all the same features of the 300 /600 /2000 Series, except the 3000 will also have 20Mhz channels so more Bolts can be used in a smaller space. Not just smaller, but lighter too, allowing these models to integrate into any rig unnoticed. 


  • Deluxe SDI | HDMI Wireless Video Tranceiver Set - V-Mount 1000ft
  • Longer Range

Transmit visually lossless video up to 1000ft with no delay

  • 2 New DFS Channels

Operate interference-free more often in the USA and Europe by making use of two newly introduced DFS channels

  • 20% Smaller Chassis

Not just smaller, but lighter too, allowing these models to integrate into any rig unnoticed

  • More Robust Than Ever Before

Reach your Bolt’s full range and potential right out of the box with new software that provides the most robust wireless link we’ve ever created

  • Rapid Reconnection

Reconnect times during a dropped link are now instantaneous once you move back into range

  • Built-in HDMI To SDI Converter

Perfect for use with MoVI and other gimbals, Bolt’s TX has a built-in HDMI to SDI converter, allowing you to connect both your on-camera monitor and video source via the same device

  • Individual Identity

Easily identify which Bolt TX and RX work together with removable colored top plates

  • Support for Spectrum Analyzer

You can now view which channels are not ideal for Bolt whenever you arrive on set. No more guessing, no more mystery interference.

  • Supports Wired Pairing
  • Metadata and timecode support
  • 3D LUTs
  • Dual inputs/outputs
  • Multicast capable
  • Manual frequency selection
  • USB 3.0 GRAB Engine included


Additional Information

What's in the box

  • 1 x Bolt Pro 1000 TX SDI/HDMI
  • 1 x Bolt Pro 1000 RX SDI/HDMI
  • 1 x Panel Antenna Array 5GHz 3x16dBi 2x 14dBi Black
  • 1 x Bolt RX Single V-Mount Battery Plate 14.4V
  • 1 x SKB Waterproof Utility Case (22 x 17 x 8 inches)
  • 5 x N-Male to RP-SMA 12 inch cables (for use with Bolt Rx Only)
  • 1 x 1/4 20" Thumb Screw (1.25 inch)
  • 1 x 1/4 20" Thumb Screw Plastic Head 2 inch length
  • 1 x 1/4 20 Thumb Screw Plastic Head 3/8 inch length
  • 1 x 1/4-20 Screw Phil Pan Mach Black 3/8 inch
  • 1 x 1/2 20" Lightstand Adapter
  • 1 x 3/8" Lightstand Adapter
  • 1 x 2pin Lemo to PowerTap - 18 inch Cable
  • 1 x 2pin Lemo to PowerTap - 11 inch Cable
  • 1 x PSU 2-Pin Lemo 18W
  • 1 x USB 3.0 SuperSpeed Cable (A to Micro, 3ft)
  • 1 x Hot Shoe Adapter
  • 2-3 x (2 for 1 Rx, 3 for 2 Rx) SDI Cables (BNC to BNC)
  • 2-3 x (2 for 1 Rx, 3 for 2 Rx) HDMI Cables (Type A to Type A)
  • 5 x Antenna 2dBi WiFi 5.8GHz
  • 2 x Antenna 2dBi WiFi 2.4/5.8 GHz
  • 1-Year Warranty on Bolt Pro 2000 Units