AJA Video Systems OG-FIBER-2R Fiber to SDI Converter

openGear 2-channel Fiber to SDI Converter

The OG-FIBER-2R is a state-of-the-art, openGear-compatible, two-channel Fiber to 3G-SDI converter, enabling SDI signals to be extended up to 10km over standard single-mode fiber optic cable. The two fiber inputs are completely independent allowing different SDI rates to be carried on each channel.

In stock
Part No:
£584.00 £486.67
Did you find this item priced lower than £584.00 somewhere else? Yes

openGear Compatibility
The openGear standard ensures that AJA cards will be compatible with other openGear products from certified openGear partners. With a growing list of products, openGear is the future of rackframe products.

The fiber inputs are re-clocked with best-in-class input jitter tolerance. SDI rates of 270Mb, 1.5Gb, and 3Gb are supported. The fiber connector is attached to the main card for added reliability and cost savings.

  • Automatic detection and re-clocking of 270Mb, 1.5Gb, and 3Gb SDI data rates
  • “Input Present” and “Input SMPTE Lock” LEDs
  • Hot-swap capable
  • Compatible with DFR-8321 and OG3 openGear frames
More Information

Video Formats

  • 100 Mbps - 3 Gbps, format agnostic


Video Input Digital

  • 2 x Single mode optical fiber, LC connector, SMPTE-297
  • Frequency: 1260-1620nm
  • Minimum Input Power:

  • 270 Mbps, 1.5 Gbps: -20 dBm

  • 3.0 Gbps: -18 dBm


Video Output Digital

  • 2 x 3G-SDI BNC, SMPTE-259/292/424



  • 270 Mbps, 1.483 Gbps, 1.485 Gbps, 2.966 Gbps, 2.970 Gbps - Auto Select
  • All other rates are passed through and not reclocked


Size (w x d x h)

  • openGear standard form factor, front slot and rear card
  • Two slots required for each card



  • openGear frame compatible, 2.5 watts max per card



  • Safe Operating Temperature: 0 to 40 degrees C (32 to 104 degrees F)
  • Safe Storage Temperature (Power OFF): -40 to 60 degrees C (-40 to 140 degrees F)
  • Operating Relative Humidity: 10-90% noncondensing
  • Operating Altitude: <3,000 meters (<10,000 feet)