AJA Video Systems OG-2x4-SDI-DA Distribution Amplifier
openGear 2 x 4 3G-SDI Re-clocking DA
The OG-2x4-SDI-DA is an openGear-compatible, state of the art 3G-SDI distribution amplifier. The incoming 3G-SDI signals on the 2 input channels are reclocked and distributed to 4 x 3G-SDI outputs each, or alternatively can function as a 1 x 8-Channel DA, allowing the same signal to be sent to eight destinations simultaneously. This dual input capability allows double the number of DAs in limited frame space. A 10 BNC rear Open Gear connector module is included.
The openGear standard ensures that AJA cards will be compatible with other openGear products from certified openGear partners. With a growing list of products, openGear is the future of rackframe products.
The 3G-SDI input is equalized and re- clocked with best-in-class cable length capability and input jitter tolerance. SDI rates of 270Mb, 1.5Gb, and 3Gb are supported. One SDI input and 9 SDI outputs are provided. A 10-BNC rear openGear connector module is included.
- Input: 2 x 3G-SDI, BNC connector (2 x 4 mode)
- 1 x 3G-SDI, BNC connector (1 x 8 mode)
- Outputs: 4 x 3G-SDI each DA, BNC connector (2 x 4 mode)
- 8 x 3G-SDI, BNC connector (1 x 8 mode)
- Automatic cable equalizer and automatic reclocker bypass
- Automatic detection and reclocking of 270Mb, 1.5Gb, and 3Gb SDI data rates
- Advanced jitter input tolerance and low jitter reclocked outputs
- Power: 2.0 watts max per card
- Hot swap capable
- Compatible with DFR-8321 and OG3 openGear frames
Video Input Digital
Video Output Digital
Cable Equalization (Belden 1694A coax)
Size (w x d x h)