Skip to the beginning of the images gallery

AJA Video Systems C10DA Analog Distribution Amplifier

Analog Video 1x6 Distribution Amplifier

The C10DA is a 1x6 Analog Distribution Amplifier with support for NTSC and PAL offering the ability to distribute multiple copies of the incoming signal or extend content of composite video with gain adjustment to compensate for long cable runs where needed. The C10DA can also be used to DA Tri-Level sync in an HD facility when a sync signal is fed externally into the Video Input.

Part No:

C10DA

Usually Ships in 1-2 Days

£248.00 £206.67

Did you find this item priced lower than £206.67 somewhere else? Yes

Description

Features

Compact 1 x 6 Analog Distribution Amplifier
- NTSC
- PAL
May be used to distribute tri-level sync when a syync signal is fed into the Video Input for HD workflows
Low Cost
5 year warranty

Specification

More Information
Specification	Formats NTSC PAL Bi-level Reference Tri-level Reference AES3-id LTC Inputs 1 Analog, Differential, 1 x BNC Outputs 6 Analog, 6 x BNC Termination 75 Ohms or nonterminated Video Bandwidth 0 – 6 MHz +/- 0.1dB Gain -3dB, -2dB, -1dB, 0dB, +1dB, +2dB, or +3dB, +/- 0.3dB Diff Gain 0.15%, not load dependent Diff Phase 0.1 degree, not load dependent H/V Tilt < 0.1% Response Variation < 0.1dB 1 to 6 loads Coupling DC Max Common Mode Signal 10Vp-p Return Loss > 35dB to 6 MHz all inputs and outputs Output Isolation >40dB User Controls External Dipswitch Termination Gain Size (w x d x h) 5.8" x 3.1" x 1.0" (147mm x 79mm x 25mm) Weight 0.8 lb (0.3 kg) Power 5VDC Regulated, 2 Watts, power supply required, included with purchase Environment Safe Operating Temperature: 0 to 40 degrees C (32 to 104 degrees F) Safe Storage Temperature (Power OFF): -40 to 60 degrees C (-40 to 140 degrees F) Operating Relative Humidity: 10-90% noncondensing Operating Altitude: <3,000 meters (<10,000 feet)