Skip to the beginning of the images gallery

AJA Video Systems 12GM SDI Muxer/DeMuxer Mini Converter

12G-SDI to/from SDI Muxer/DeMuxer

12GM is a compact SDI transport converter that enables 12G-SDI to Quad 3G-SDI and Quad 3G-SDI to 12G-SDI conversion. The Muxer/ DeMuxer supports 4K, UltraHD, 2K, HD and SD workflows and conversions from multi-link SDI signals to single link SDI signals, and vice versa at 12G, 6G, 3G and 1.5G bit rates.

Part No:

12GM

Please check availability

£1,148.00 £956.67

Did you find this item priced lower than £956.67 somewhere else? Yes

Description

Universal Power Supply
All AJA Mini-Converters ship with a universal power supply that includes international plug connections for use around the world.

Compact and Portable
AJA Mini-Converters are small enough to fit behind a monitor, in the back of a rack or directly on a camera rig. A locking power connector can't accidentally pull loose and an optional P-TAP power cable allows for battery power in remote locations.

AJA Quality - Guaranteed
All AJA Mini-Converters are covered by a 5 year warranty and AJA's advanced replacement policy. If a replacement is necessary, AJA will ship a new unit immediately without the need to send the original unit back first, ensuring you are up and running again as quickly as possible.

Features

Compact 12G to/from 3G conversion
SMPTE 2082 inputs and outputs configurable to SMPTE 425 inputs and outputs
Converts SMPTE 425M A to/from SMPTE 425M B
Fully equalizing and reclocking with jitter attenuation
If SMPTE 292M is input, all outputs are 1.5G SMPTE 292M
DWP-U-R1 power supply included
Five Year warranty

Specification

More Information
Specification	Video Formats (4K) 4096x2160p (UltraHD) 3840x2160p (2K) 2048x1080p (HD) 1920x1080p (HD) 1920x1080i (HD) 1280x720p (SD) 720x576i (SD) 720x480i Video Input/Output Digital 4 x 12G-SDI BNC, SMPTE-259/292/424/2081/2082 4:2:2 YCbCr 4:4:4 YCbCr/RGB 8 or 10 bit Two Sample Interleave (2SI) source mapping Square Division (Quadrant) source mapping Single Link 12G-SDI, SMPTE 2082-10 Single Link 6G-SDI, SMPTE 2081-10 Single Link 3G-SDI Level A, B-DL, or B-DS, SMPTE 425-1 Dual Link 3G-SDI Level B-DS (2 x 3G), SMPTE-425-3 Quad Link 3G-SDI Level A or B-DL (4 x 3G), SMPTE-425-5 Dual Link HD-SDI (2 x 1.5G), SMPTE-372 Quad Link HD-SDI (4 x 1.5G) Single Link HD, SMPTE-292 Single Link SD, SMPTE-259 (4K) 4096 x 2160p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60 (UltraHD) 3840 x 2160p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60 (2K) 2048 x 1080p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60 (HD) 1920 x 1080p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60 (HD) 1920 x 1080i 25, 29.97, 30 (HD) 1280 x 720p 50, 59.94, 60 (SD) 625i 25 (SD) 525i 29.97 Cable Equalization (Belden 1694A coax) 12 Gbps, 90m 6 Gbps, 125m 3 Gbps, 160m 1.5 Gbps, 200m 270 Mbps, 470m Audio Input / Output Digital SDI embedded audio, 24-bit, 16-Channel User Interface USB port used with supplied cable and Mini-Config software application to configure device via Mac or Windows. Size (w x d x h) 5.76” x 4.02” x 0.90” (146mm × 102mm × 23mm) Power 5-20VDC regulated, 12 watts, power supply required, included with purchase AC Adapter: 100-240VAC, 50/60 Hz, universal input Environment Safe Operating Temperature: 0 to 40 degrees C (32 to 104 degrees F)* Safe Storage Temperature (Power OFF): -40 to 60 degrees C (-40 to 140 degrees F) Operating Relative Humidity: 10-90% noncondensing Operating Altitude: <3,000 meters (<10,000 feet) *12GM uses approximately 12 watts of power and convection cooling. It will be very warm to the touch, which is normal. When installing the unit, mount in a location where it has access to air for proper cooling. Do not stack the 12GM with other Mini-Converters