AJA OG-FIBER-2T-X openGear 3G-SDI to Single-Mode Fibre Transmitter

openGear 2-Channel 3G-SDI to Single-Mode LC Fiber Transmitter for CWDM

The OG-FIBER-2T-X is a state of the art, openGear compatible, 2-channel 3G-SDI to Fiber converter with CWDM SFP options, enabling 3G-SDI signals to be extended up to 10 km (32,808 ft) over standard single-mode fiber optic cable.

In stock
Part No:
OG-FIBER-2T-X
£550.00 £458.33
Did you find this item priced lower than £550.00 somewhere else? Yes

The OG-FIBER-2T-X is a state of the art, openGear compatible, 2-channel 3G-SDI to Fiber converter with CWDM SFP options, enabling 3G-SDI signals to be extended up to 10 km (32,808 ft) over standard single-mode fiber optic cable. The two 3G-SDI inputs are completely independent allowing different 3G-SDI rates to be carried on each channel.

Connectivity

The 3G-SDI inputs are re-clocked with best-in-class input jitter tolerance. 3G-SDI rates of 270Mb, 1.5Gb, and 3Gb are supported. The fiber connector is attached to the main card for added reliability and cost savings. 

CWDM SFP Options

Each AJA CWDM transmitter supports two individual wavelengths, as shown in the chart below:

Wavelength #1                    Wavelength #2

1271 nm                              1291 nm      

1311 nm                              1331 nm

1351 nm                              1371 nm

1391 nm                              1411 nm

1431 nm                              1451 nm 

1471 nm                              1491 nm

1511 nm                              1531 nm

1551 nm                              1571 nm

1591 nm                              1611 nm

openGear Compatibility

The openGear standard ensures that AJA cards will be compatible with other openGear products from certified openGear partners. With a growing list of products, openGear is the future of rackframe products.

Flexible I/O

The modular rear panel allows custom I/O connections per card (included with individual cards).

Failsafe

The optional redundant power supply provides a secondary power source in the event of a primary power failure.

Ethernet Access

A standard Ethernet connection allows the frame to be accessed via the Dashboard application for overall frame communication. Optional per-card Ethernet access can be installed in the frame for advanced communication with compatible openGear cards.

  • Automatic detection and re-clocking of 270Mb, 1.5Gb, and 3Gb SDI data rates
  • “Input Present” and “Input SMPTE Lock” LEDs
  • Hot-swap capable
  • Compatible with DFR-8321 and OG3 openGear frames
More Information
Specification

Video Formats

  • 100 Mbps - 3 Gbps, format agnostic

Video Input Digital

  • 2-Channel independent 3G-SDI Inputs, SMPTE-259/292/424

Video Output Digital

  • 2-Channel independent CWDM LC Fiber Outputs, SMPTE-297*
  • Optical Power: -5dBm (min), 0dBm (max)
  • Extinction Ratio: 7.5dB (Typ)

*Please see SFP Configurator for CWDM wavelength choices

Reclocking

  • 270 Mbps, 1.483 Gbps, 1.485 Gbps, 2.966 Gbps, 2.970 Gbps - Auto Select
  • All other rates are passed through and not reclocked

Size (w x d x h)

  • openGear standard form factor, front slot and rear card
  • Two slots required for each card

Power

  • openGear frame compatible, 2.5 watts max per card

Environment

  • Safe Operating Temperature: 0 to 40 degrees C (32 to 104 degrees F)
  • Safe Storage Temperature (Power OFF): -40 to 60 degrees C (-40 to 140 degrees F)
  • Operating Relative Humidity: 10-90% noncondensing
  • Operating Altitude: <3,000 meters (<10,000 feet)