This site uses cookies to provide you with the great user experience. Find out more here. By using this site you consent to use our cookies.
AJA IPR-10G2-SDI IP Mini Converter
SMPTE ST 2110 IP Video and Audio to SDI Converter
The IPR-10G2-SDI is a SMPTE ST 2110 to SDI converter supporting with two 10 GigE ports to support hitless switching.
IPR-10G2-SDI provides monitoring of HD SMPTE ST 2110 signals across 10 GigE to two 3G-SDI ouputs.
It receives SMPTE 2110 over 10 GigE connectivity, formats the data for output over 3G-SDI, and the associated audio from the video stream is extracted, synchronized, and embedded into the 3G-SDI signal and also output on an analog RCA interface.
Suited for point-of-use applications including HD source monitoring, digital signage and video walls, the IPR-10G2-SDI decodes SMPTE ST 2110 streams and formats the data for 3G-SDI output. The audio associated with the video stream is extracted, synchronized, and then embedded into the SDI signal as well as output on an analog RCA audio interface.
The IPR-10G2-SDI features 2x 10 GbE SFP+ cages allowing “hitless switching”, providing redundancy protection for critical distribution and monitoring applications.
Monitor ST 2110 Video and Audio from anywhere on the Network.
The IPR-10G2-SDI is a SMPTE ST 2110 to SDI Mini-Converter suited for point-of-use applications including source monitoring and 3G-SDI output to compatible devices. With two 3G-SDI outputs with mirrored source video, you can drive a display and connect to 3G-SDI simultaneously.
With 3G/1.5G-SDI routers often at capacity while facilities await their transition to IP, there is a huge benefit in being able to send video sources from a feed, camera, router or edit bay via IP and provide SDI monitoring at the destination while feeding your video and audio further into a 3G-SDI chain.
The AJA IPR-10G2-SDI receives SMPTE ST 2110 IP video and audio, then formats the data for output over 3G-SDI.
The audio associated with the video stream is extracted, synchronized, and then embedded into the SDI interface as well as output on an analog RCA interface.
Workflow
IPR-10G2-SDI provides two SDI outputs from SMPTE ST 2110 video and audio over IP compatible devices. Combine your IPR-10G2-SDI units with AJA KONA IP (I/O card for use in desktop workstations) to instantly create a real-world ST 2110 workflow for video over IP production and monitoring.
User Control
IPR-10G2-SDI provides two key methods for control. The Control LAN Ethernet port enables control of the Mini-Converter from web browsers on any platform and REST clients. The mini-USB connector facilitates quick and simple initial network configuration, and firmware updates.
- 1x RJ-45 (IEC 60603-7) for 10/100/1000 Base-T Ethernet (IEEE 802.3-2012)
- HTTP/1.1 (RFCs 7230, 7231, 7232, 7233, 7234, 7235)
- Web and REST clients supported
- 1x USB 2.0 Mini-B (IEC 62680-1) connector
- AJA eMini-Setup of network parameters
Universal Power Supply
All AJA Mini-Converters ship with a universal power supply that includes international plug connections for use around the world.
Compact and Portable
AJA Mini-Converters are small enough to fit behind a monitor, in the back of a rack or directly on a camera rig. A locking power connector can't accidentally pull loose and an optional P-TAP power cable allows for battery power in remote locations.
IPR-10G2-SDI extracts a SMPTE ST 2110 essence from an incoming IP stream and presents it for display on SDI devices. Providing two SFP+ cases for protection with "hitless switching". Its rugged, fanless, Mini-Converter design is ideal for placement in a wide range of display scenarios, from studios to field.
Key features:
- SMPTE ST 2110 audio, video receiver
- Supports HD up to 60p, YCbCr 4:2:2
- Rugged, fanless design
- 2x 10 GigE SFP+ cages for media LAN (providing support for "hitless switching) with status light
- 1x 1 GigE RJ-45 socket for control LAN with status light
- 2x 3G-SDI Outputs
- Full 10-bit pixel processing pipeline
- Embedded SDI audio output (up to eight channels)
- 2x RCA analog audio output
- 1x mini-USB port for initial network configuration with AJA eMini-Setup software
- Complete control interface on any web browser from a built-in webserver
- Customizable control with AJA REST API
- 5-year international warranty and support
Specification | Video Formats
Video Quality
Discovery, Registration and Control
Media Transport Interfaces
Note: Maximum supported SFP+ power is 500 mW per SFP+ cage Video Input IP
Video Output Digital
Audio Output Digital
Audio Output Analog
Reference
User Controls
Size (w x d x h)
Weight
Power
Environment
|
---|