ADAM Audio S2X
Near-Field Monitor
ADAM Audio > Loudspeakers > Active Near-Field£999.00
£1,198.80 (inc 20% VAT)
Stock: 2-3 days
The S2X brings together the virtues of the ‘classical’ 7” woofer and tweeter combination by using ADAM innovative technologies and top-class materials.
The HexaCone™ 7”-woofer is driven by a sophisticated magnet system with a 2” voice coil creating a greater linear excursion. This produces more dynamics than one would assume in a monitor of such small proportions. As a result, in addition to the unsurpassed audio quality of the X-ART and A/B amplifier combination, this monitor surprises the listener with a very powerful, deep, but always tight and precise low end.
The HexaCone™ 7”-woofer is driven by a sophisticated magnet system with a 2” voice coil creating a greater linear excursion. This produces more dynamics than one would assume in a monitor of such small proportions. As a result, in addition to the unsurpassed audio quality of the X-ART and A/B amplifier combination, this monitor surprises the listener with a very powerful, deep, but always tight and precise low end.
Optional digital input
All SX-models (except the S1X) can be optionally retrofitted with a 24 bit/192 kHz D/A Converter featuring an AES/EBU (XLR) and a SPDIF (RCA) inputs as well as a R/L/Mono switch.
The front panel
Six controls can be found on the new front panel. Input sensitivity is handled by two controls. One control allows for coarse settings (-20dB to +8dB), while the second is used for fine tuning in 0.5dB steps, ranging from -1.5dB to 2dB .
There are two controls for the lower frequencies. One is an equalizer at 80 Hz that boosts bass response sometimes desirable in popular music. The second is a shelf filter that allows the engineer to alter the frequencies below 150 Hz.
High frequencies can also be adjusted by two different controls. The first alters the high frequency volume (-2dB to +2dB), while the second is a shelf filter for frequencies above 6 kHz. Both the high and low shelf filters can raise or lower ±4 dB progressively within their frequency band.
All SX-models (except the S1X) can be optionally retrofitted with a 24 bit/192 kHz D/A Converter featuring an AES/EBU (XLR) and a SPDIF (RCA) inputs as well as a R/L/Mono switch.
The front panel
Six controls can be found on the new front panel. Input sensitivity is handled by two controls. One control allows for coarse settings (-20dB to +8dB), while the second is used for fine tuning in 0.5dB steps, ranging from -1.5dB to 2dB .
There are two controls for the lower frequencies. One is an equalizer at 80 Hz that boosts bass response sometimes desirable in popular music. The second is a shelf filter that allows the engineer to alter the frequencies below 150 Hz.
High frequencies can also be adjusted by two different controls. The first alters the high frequency volume (-2dB to +2dB), while the second is a shelf filter for frequencies above 6 kHz. Both the high and low shelf filters can raise or lower ±4 dB progressively within their frequency band.
Drivers
• Woofer 186mm (7”) HexaCone®
• Tweeter X-A.R.T
Freq.response
• (± 3 dB) 35Hz - 50kHz
Rear Panel
• Input/HF gain, Hi/Lo EQ
Built-in amplifiers
• Woofer: 250W / 300W
• Tweeter: 50W / 100W
Inputs
• Analog: Balanced XLR
• Digital (opt.): AES/EBU + SPDIF
Weight and Dimensions
• H x W x D 370mm x 220mm x 320mm (14.8” x 8.8” x 12.8”)
• Weight 10,8 kg (23.8 lbs)
• 5 Years Warranty
• Woofer 186mm (7”) HexaCone®
• Tweeter X-A.R.T
Freq.response
• (± 3 dB) 35Hz - 50kHz
Rear Panel
• Input/HF gain, Hi/Lo EQ
Built-in amplifiers
• Woofer: 250W / 300W
• Tweeter: 50W / 100W
Inputs
• Analog: Balanced XLR
• Digital (opt.): AES/EBU + SPDIF
Weight and Dimensions
• H x W x D 370mm x 220mm x 320mm (14.8” x 8.8” x 12.8”)
• Weight 10,8 kg (23.8 lbs)
• 5 Years Warranty
For Sale. For Hire. For You.