Mackie 1402-VLZ3

Just slightly larger than the 1202-VLZ3, the Mackie 1402-VLZ3 offers everything its little brother has, plus two additional mic/line channels, faders instead of knobs, and a few extra Master Section features. Ideal for home and project studios, the 1402-VLZ3 is equally at home on the road, on the stage, or in the recording studio.

While keeping all the features and functionality of its predecessor, the new Mackie 1402-VLZ3 offers even greater headroom. The 1402-VLZ3 has a redesigned Mix Bus and tweaked EQs.

• New ultra-low noise VLZ3 design with highest possible headroom
• 6 studio-grade XDR2™ Extended Dynamic Range mic preamps with:
- Ultra-wide 60dB gain range
- 130dB dynamic range
- +22dBu line input handling
- Extended low frequency response
- Distortion under 0.0007% (20Hz - 20kHz)
- Phantom power for studio condenser mics
• 12 high-headroom line inputs
• Advanced DC pulse transformer RF rejection
• 2 Aux sends, level, pan and PFL solo on each channel
• 2 stereo Aux returns + EFX to Monitor
• 3-Band Active EQ (80Hz, 2.5kHz, 12kHz)
• 18dB/oct. 75Hz Lo-Cut filter on Mic input channels
• ALT 3/4 stereo bus for added versatility
• Control Room/Phones source matrix
• Rack-mountable design using optional rack ears
• Sealed rotary controls to resist dust and grime
• New Multi-Voltage power supply for worldwide use
• Rugged steel chassis

Main Mix Noise (20 Hz-20 kHz bandwidth, 1/4" Main out, channels 1-6 Trim @ unity gain, channel EQs flat, all channels assigned to Main Mix, channels 1, 3 and 5 Pan left, 2, 4 and 6 Pan right.)
• Main Mix fader down, channel faders down: -101 dBu
• Main Mix @ unity, channel faders down: -91 dBu (95 dE Signal to Noise Ratio, ref +4 dBu)
• Main Mix fader @ unity, channel faders @ unity: -86 dBu

Total Harmonic Distortion (THD): (1 kHz@+14dBu,20Hz-20kHzbandwidth)
• Mic pre @ insert: 0.0007%

Attenuation (Crosstalk): -100 dBu (1 kHz relative to 0 dBu, 20 Hz-20 kHz bandwidth, Line in, 114" Main Out, Trim @ unity.)
• Main Mix fader down: -90 dBu
• Channel Alt / Mute switch engaged: -90 dBu
• Channel fader down: -90 dBu

• Frequency Response (Mic input to any output.): 20 Hz to 60 kHz: +0 dBI-1 dB; 20 Hz to 100 kHz: +0 dBI-3 dB

• Equivalent Input Noise (EIN) (Mic in to Insert Send out, max gain.): 150 ohm termination: -129.5 dBu, 20 Hz-20 kHz

Common Mode Rejection Ratio (CMRR) (Mic in to Insert Send out, max gain.)
• 1 kHz: better than -70 dB

Maximum Levels
• Mic in: +22 dBu
• Tape in: +16 dBu
• All other inputs: +22 dBu
• Main Mix XLR out: +28 dBu
• All other outputs: +22 dBu

Impedances
• Mic in: 2.5 kilohms
• Channel Insert return: 2.5 kilohms
• All other inputs: 10 kilohms or greater
• Tape out: kilohms
• All other outputs: 120 ohms

EQ
• High Shelving: ±15 dB@ 12 kHz
• Mid Peaking: ±15 dB@ 2.5 kHz
• Low Shelving: ±15dB@80Hz

Power Consumption
• 25 watts

Dimensions and Weight
(H x W x D) 12.9" x 14.0" x 3.2" (329 mm x 356 mm x 81 mm)

Weight
• 9.51b (4.5 kg)