Cedar Audio DNS2000
Dialogue Noise Suppressor for Pro Tools
Cedar Audio > Noise Reduction > Noise Suppression
CEDAR's Dynamic Noise Suppression technology has become the standard for removing background noise from dialogue. With near-zero latency, 40-bit processing, and a fast, intuitive user interface, it eliminates traffic noise, aircraft, air conditioning, wind, rain, tape hiss, and general background from recordings and live transmissions. It will help to remove motor noise from small covert recorders and eliminate electrical interference. It will help to compensate for unfavourable acoustic conditions, and poor microphone placement. It will even suppress excessive reverberation.
• Seamless integration
The DNS2000 is a fully automated implementation of our DNS technology designed specifically for Pro Tools® users. Connected to its Mac- or Windows XP- based Pro Tools host using a USB cable, the DNS2000 processor provides the 24-bit I/O for the system and will handle two independent channels simultaneously. Housed in a 1U rack, it offers a huge amount of floating-point power and performs all the audio processing in real-time, thus freeing up the host computer's CPU for other tasks.
• Remote Control Software
The DNS2000 Remote Control Software runs on Mac OSX and Windows XP (SP2) based Pro Tools systems, providing a fast and intuitive user-interface based on CEDAR's Academy Award winning DNS1000 dynamic noise suppressor, itself a standard for post, dubbing and audio forensic applications. The Software controls all aspects of the DNS2000, and automates its operating parameters.
• Seamless integration
The DNS2000 is a fully automated implementation of our DNS technology designed specifically for Pro Tools® users. Connected to its Mac- or Windows XP- based Pro Tools host using a USB cable, the DNS2000 processor provides the 24-bit I/O for the system and will handle two independent channels simultaneously. Housed in a 1U rack, it offers a huge amount of floating-point power and performs all the audio processing in real-time, thus freeing up the host computer's CPU for other tasks.
• Remote Control Software
The DNS2000 Remote Control Software runs on Mac OSX and Windows XP (SP2) based Pro Tools systems, providing a fast and intuitive user-interface based on CEDAR's Academy Award winning DNS1000 dynamic noise suppressor, itself a standard for post, dubbing and audio forensic applications. The Software controls all aspects of the DNS2000, and automates its operating parameters.
• Timecode automation
• Less than 10 samples latency so there is no loss of lip sync
• 24-bit I/O and dual 40-bit f/p DSPs offer better audio quality, control and selectivity than analogue systems
• Two independent channels per rackmount unit, and up to 126 racks per system
• Low, mid, and high frequency ranges allow you to tune the process to the type of noise
• You can combine ranges for wide-band processing when needed
• Less than 10 samples latency so there is no loss of lip sync
• 24-bit I/O and dual 40-bit f/p DSPs offer better audio quality, control and selectivity than analogue systems
• Two independent channels per rackmount unit, and up to 126 racks per system
• Low, mid, and high frequency ranges allow you to tune the process to the type of noise
• You can combine ranges for wide-band processing when needed
• I/O type: Digital PCM
• Data formats: SPDIF or AES/EBU
• Sample rates: 44.1, 48 kHz
• I/O resolution: 24 bits
• Process resolution: 40 bits, floating-point
• Processor power: 198 Mflops
• Latency: <10 samples (0.2ms)
• Power supply: 90-260VAC; 50-60Hz auto-selecting
Weight and Dimensions
• 1U rackmount, 20cm depth
• Data formats: SPDIF or AES/EBU
• Sample rates: 44.1, 48 kHz
• I/O resolution: 24 bits
• Process resolution: 40 bits, floating-point
• Processor power: 198 Mflops
• Latency: <10 samples (0.2ms)
• Power supply: 90-260VAC; 50-60Hz auto-selecting
Weight and Dimensions
• 1U rackmount, 20cm depth
For Sale. For Hire. For You.
