Dynaudio Acoustics AIR 6 MASTER

AIR6 is developed for both stereo and multichannel monitoring in any demanding environment including:
• Post Production
• Music Recording and Mixing
• Film Editing (smaller rooms)
• DVD authoring and Mastering
• 5.1 Production (Audio or Audio for pictures)
• Broadcast
• Edit suites

• 6.5" woofer and 1.1 soft dome tweeter
• 192 kHz support via Dual Wire
• Bass Management, with selectable frequency crossover points
• Advanced Bass Management
• Acoustic Placement Compensation
• Preset Storage and Recall
• Programmable reference levels
• Level alignment in 0,1dB steps
• All Monitors aligned within +/- 0.2dB precision
• Integrated Parametric EQ’s and delay in each monitor (only accessible with PC-IP)
• Central and Remote control of system and parameters
• Direct Digital inputs and Analog inputs (optional)
• Networking in-between all AIR components
• Dedicated AIR Base subwoofers
• Two times 200-watt amp package in each monitor

General -
System:
• 2 way active NearField Monitor

Frequency response (+/- 3 dB):
• 40 Hz – 22 kHz

Peak SPL 1m, pair (IEC Short Term):
• > 128 dB peak

Peak SPL 2m, 5.1 (IEC Short Term):
• > 126 dB peak

Max SPL 1m, (IEC Long Term):
• 104 dB RMS

Precision of monitor matching:
• +/- 0.2 dB

Port tuning frequency:
• 45 Hz

Internal cabinet volume:
• 12.1 litres

Bass principle:
• Bass reflex

Crossover frequency:
• 2150 Hz (DSP generated)

Crossover slope:
• 24dB/oct (Linkwitz Riley, DSP generated)

Tweeter:
• Esotec 28mm / 1.1" soft dome, rear chamber, magnetic fluid, 4 mm die-cast alu front, pure aluwire voice coil

Woofer:
• 175mm / 6.9" one-piece molded polypropylene cone, 75mm / 3" pure alu wire voice coil

Mains voltage:
• 100 to 240 VAC, 50 to 60 Hz (auto-select)

Power consumtion:
• 40 W @ 1/8 max power (IEC 60065)

Finish -

Amp:
• Black anodized alu back plate

Cabinet:
• Dark gray MDF baffle, Silver foil

Dimensions (HxWxD):
• 338 x 216 x 345mm / 13,3” x 8,5” x 13,6”

Weight:
• 9.8 kg / 21.8 lbs

Amplifier -

Tweeter and woofer:
• Tweeter 200 W amp/Woofer 200 W amp

Room & Distance -

Typical listening distance:
• 1.2-2 m / 4-7 ft

Typical room size:
• 50-100 m3 / 1600-3500 ft3

System sample rates -

Internal sample rate:
• 192 and 176.4 via Dual Wire (optional Digital Card required) and 96, 88.2, 64, 48, 44.1 or 32 kHz

AIR Masters only -

I/O Connectors:
• XLR (2 channels AES/EBU in) 3 x RJ 45 proprietary TC Link

Formats:
• AES/EBU (24 bit)

Word clock input:
• BNC, 75ohm, 0.6-10 Vpp

Display:
• 2 x 16 character dot matrix

Operation:
• Menu system / Four buttons

Analog Input options -

Input connectors:
• XLR balanced (pin 2+, pin 3-)

Impedance:
• 10/3 k ohm (Balanced/unbalanced)

Selectable Full scale Input level:
• +9, +15, +21, +27 dBu

Dynamic range:
• > 113 dB typ. (unweighted), BW: 20-20 kHz

THD+N:
• < -105 dB typ. @ 1 kHz, -3 dBFS

Crosstalk:
• < -120 dB, 20 Hz to 20 kHz

A to D Conversion:
• 24 bit (Dual bit delta sigma sampling at 4.1/5.6/6.1/6.1 MHz)

I/O Connectors:
• 2 x RJ45 proprietary TC-Link

EMC -

Complies with:
• EN 55103-1 and EN 55103-2, FCC part 15 class B, CISPR 22 class B

Safety -

Certified to:
• IEC 60065, EN 60065, UL 6500 and CSA E60065 CSA FILE #LR108093

Enviroment -

Operating temperature:
• 32° F to 122° F (0° C to 50° C)

Storage temperature:
• -22° F to 167° F (-30° C to 70° C)

Humidity:
• Max. 90 % non-condensing