Specialist suppliers of pro audio/video equipment to the film,
post-production, broadcast and music recording industries.

Dynaudio PRO M3 XE Package (2x M3XE + 2x PLM10000Q)

Main Studio Monitor System
Part No: DYN-M3XEP

Dynaudio M3 is the ultimate main monitoring solution, combining world-class driver and cabinet technology from Dynaudio with cutting-edge signal processing and amplification from Lab.gruppen and Lake. 

Usually ships within 3-5 days shipped within 3-5 days
£27,900.00 £23,250.00 ex VAT
You will earn 23250 eDiscs for buying this product
£27,900.00 £23,250.00 ex VAT
Dynaudio PRO

Product Description


The Dynaudio Professional M3XE monitor system that takes monitoring to a whole new level with a significant upgrade from its predecessor - the renowned M3A 3-way monitor. Each speaker is powered by a four channel PLM 12k44 amplifier from Lab.gruppen.

With the newest and most pristine Dynaudio ESOTAR driver technology, M3XE takes over where most other monitor systems give up. With unsurpassed attention to detail, underpinned by an impressive 22Hz - 21kHz frequency response and beyond 135dB SPL, M3XE leaves no room for desire in terms of resolution, range or sheer power.

Different from its sister monitor M3VE, a set of M3XE's is powered by not one, but two 12k44 Lab.gruppen amplifiers, using the integrated Lake active cross-over processing as well as powering the HF, MF and dual LF woofers by the four independent amplifier channels of the 12k44.

Please visit http://labgruppen.com/series/plm-series for more info.

In short, M3XE surpasses any and all main monitor expectations!


  • Unique linear phase frequency response
  • Frequency Response: 20Hz - 22kHz
  • Dual 12" ESOTAR Woofers, aluminum voice coil
  • Dual 6" Midrange drivers, MSP cone, 75mm aluminum voice coil
  • 1.1" (28mm) ESOTAR² Soft-dome tweeter, aluminum voice coil
  • Max. SPL (short term peak @ 1m): 133 SPL
  • Heavy internal damping for minimum cabinet resonance


Additional Information

  • System: 3-way Active Main Monitor
  • Frequency Response (+/- 3 dB): 22 Hz - 21 kHz
  • Peak SPL 1m, pair (IEC Short Term): > 135 dB peak
  • Resonance Frequency: 24 Hz
  • Internal Cabinet Volume: 145 liters
  • Bass Principle: Bass reflex
  • Amplifier: 1 Lab-gruppen PLM10000Q (pr. speaker). Preset: M3XE V06
  • Tweeter: Esotar² 28 mm soft dome Magnetic fluid, Metal rear chamber, Pure alu wire voice coil, 4 mm die-cast alu front, Neodym magnet material
  • Midranges: 15 cm with 75 mm diameter pure alu wire voice coil, MSP-cone, long stroke
  • Woofers: Esotar 30 cm with 75 mm diameter pure cupper wire voice-coil, MSP-cone, long stroke
  • Weight: 65 kg.
  • Dimensions (WxHxL): 555 x 775 x 505 mm
  • Cabinet: 25 mm MDF. Strategically braced and damped. Low turbulence reflex-ports. Separate chambers for each woofer.
  • Crossover: All 4 channels: Active dsp-based in-amp Lake processor. Each channel has impedance-correction providing the best working conditions for the ampflifier.


PLM 10000Q

  • Model: PLM10000Q
  • Number of amplifier channels: 4
  • Peak total output all ch. driven: 10800 W
  • Pr. Channel (all ch. driven, 4 ohms): 2300 W
  • THD+N A-to-D @1kHz: <0.00033%
  • Internal Sample Rate: 96 kHz
  • Digital Input S-rates: 44.1, 48, 88.2, 96, 176.4, 192 kHz
  • Limiting: Digitally implemented, zero-overshoot Inter-Sample Voltage Peak Limiting (ISVPL) adjustable in 0.1 V steps from 17.8 to 153
  • Weight: 30 lbs / 13.5 kg
  • Dimensions (WxHxD): 483 mm (19”), 88 mm (2 U), Overall 470 mm (18.5”) deep including handles and rear support