Blackmagic Design GPI & Tally Interface

Adds 8 Tally relay contacts to any ATEM switcher

GPI and Tally Interface connects to an ATEM switcher and provides 8 contact closure Tally outputs. Tallies will be displayed when connected to an ATEM switcher to indicate their "on-air" status and you can even connect multiple interfaces together to increase the number of tally outputs.

Part No:
BMD-SWTALGPI8
Usually Ships in 1-2 Days
£449.00 £374.17
Did you find this item priced lower than £374.17 somewhere else? Yes

GPI and Tally Interface connects to an ATEM switcher and provides 8 contact closure Tally outputs. Tallies will be displayed when connected to an ATEM switcher to indicate their "on-air" status and you can even connect multiple interfaces together to increase the number of tally outputs.

More Information
Specification

Connections

  • Contact Closure: 25 pin D-type connector providing 8 opto isolated inputs and 8 relay contact closure outputs
  • Inputs: Optical isolators triggered by connection to ground. Max 5V at 14mA.
  • Outputs: Mechanical relay contact closure to ground. Max 30V at 1A.
  • Ethernet: 10/100 BaseT with loop through for connecting to other ethernet enabled equipment
  • Computer Interface: 1 x USB 2.0 high speed interface for configuration and firmware updates


Extras

  • Software Included: Configured via ATEM Switcher Utility
  • Internal Software Upgrade: Firmware built into software driver. Loaded at system startup or via updater software
  • Operating System: Microsoft Windows 7 and Apple Mac OS X
  • Power Supply: 12V power supply included with international socket adaptors for all countries
  • Product Warranty: 12 Months Limited Manufacturer's Warranty